Half way through my Custom Tail lights, a cut and shut tail light setup ga Options

[ST-204R]

gday ppl these are some pics of some tail lights im half way through making.

lately there have been a few post discussing tail lights and this inspired me to make some :)

ive chop the led ring from a aftermarket set for a 2002 model REX, being a reasonablly cheap kit the rings were a modular design so they just clipped out ( a bit of a plus for i was just guna cut them out) i couldnt separte the outer casing even with a heat gun.

what ive done is made a faceplate to sit the rings on to give a flush fit. im still to mould the sides of the faceplate but will get there. the final design is going to be a satin black body, with only the ring visable through clear glass, well plastic but anyways.... so far a total of almost a days work but i started about 3 weeks ago.. work bad wheather and other projects are pushing the lights from being done

so thoughts on my project???


%

[ST-204R]

lol the reverse light will be just under the indicator

the clear glass will be a peice of perspex cut and a 100% fit layed into the squares (rounded edges) with a heat resistant silcone bead around it

and the reason for cutting out the middle was caz i couldnt seperate the 2 halves no matter how hot i got the light

and ill give an update this wknd (3 days til saturday)

This post has been edited by ST-204R: Jul 21, 2010 - 5:53 AM