RvA944 6GC Autocross Project Options

[RvA944]

Hello all,

Well I want to start this thread so i can ask some questions and chart my prgress as I build this project. This car will be a dule purpose car, run around and weekend worrier doing autocross.

here's what I'm starting with... '94 ST 1.8L





So I'm thinking I'm going to need the following:

new nose: got one on order.
coilovers: here I'm thinking about using the Megan Racing Street Series Coilovers for 94-99 Toyota Celica GT/ST FWD
Would the BC be a better choice? if so where do I find them.
Wheels: Voxx MG3 17x7
Tires: Yokohama S.drive 215/40R-17 87W XL B
header & exhaust any subjections????

Best,

Roger

This post has been edited by RvA944: Jun 21, 2010 - 8:54 PM

[RvA944]

Well I've driven other cars of this size/weight with about 200hp and the response is good and about right. not anything like a 350hp but I think in the parking lots running around in second gear theres going to be a lot of torque steer with out little cellie. so I'm a little worried about that. I drove the Dodge Daytona when it came out and christ that had some really bad torque steer and I really did like that. Now these little 7A don't torque steer at all and I like to keep it that way. Drivability over HP wins as far as I'm concerned so, maybe someone who's driven both a Beams and the 3SGTE might chime in and possibly tell me how bad the torque steer is with these two engines??????