JDM Facelift headlight connectors, Does not fit the car Options

[Iceman22]

Hi.
I installed the JDM facelift headlights on my car today. The problem is that the connectors on the lights that are on the outher left and right side don't match with the connectors that are on the car. So I got no light atm.
I'm pretty sure many on this forum had this unexpected case, so I hope I can get some help about what I have to do now ?
Pictures:









This post has been edited by Iceman22: Aug 11, 2010 - 4:39 PM

[pyeatts]

Nope, with an HID kit your main lights are ready to go. The accent lights can be used without the plugs if you get some electrical spades and make your own connections. It's only two wires and you can use something like stereo speaker spades to connect them up to any light source you want. Just make sure you seal the back of the plug so water doesn't get in. I used shrink tubing to seal the back of mine with no trouble. I hooked mine up to run whenever the car is running like modern cars have, but a lot of members have them running on a seperate switch or running with the parking lights.