Installation question, For automatics Options

[jtmlb3k]

Hey,

I just got that stupid little plastic trim piece that covers the hole around the shifter for an automatic (thanks Mike) but I don't know how to get it in. Do I take off the top part of the shifter? Does anyone have any idea?

Any help would be awesome cuz I dropped another quarter down there today on my way through tolls...

Thanks!

[JuMPiiN]

Im not exactly 100% sure what your talking about... But if its the P R D 3 2 1 thing, you have to : Pull off the radio bezel peice held by clips, unscrew the 2 screws that hold the shifter bezel together, and the take the middle console peice off you have to Take off the glove box, then you will see the screws in the back on the bottem for the middle peice, then on the drivers side remove the bottem plastic peice under the steering wheel, then you will see the screw on the back right side unscrew that, and finnally remove the 2 bolts under the console lid and just pull it off. Be careful off the AC control, dont pull it put with it.

It sounds hard but it really only takes about 15-20 minutes to take all that out. Putting it back in you have to do it in order. It really isnt complicated.