![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Dec 26, '09 From Albuquerque, NM Currently Offline Reputation: 19 (100%) ![]() |
I've got an ST and as you know, the rear brakes are drums. I want to swap them out for discs and I'm going to go junkyard hopping soon and I know the GTs have discs, so what would I have to pull from the GT to make the brakes work on my ST?
This post has been edited by HectortheRican: Aug 27, 2010 - 3:37 PM -------------------- taking too long to mod since '09
June '12 COTM '95 AT200 |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() Joined Jul 3, '09 From UT Currently Offline Reputation: 14 (100%) ![]() |
Got the disc brakes on. The ABS has no bearing on whether they will work or not. You can just use the ST hub and bolt the brake assembly behind it. The brakes are the exact same.
Although, i ended up using the drum pads that came on them because the pads i got at autozone were too thick? The physical part size was the same, but the rotors wouldnt fit over the thicker pads... We may want to update the how-to. |
![]() ![]() |
Lo-Fi Version | Time is now: May 28th, 2025 - 9:46 AM |