Aug 15, 2010 - 1:08 PM
|
|
|
Enthusiast ![]() Joined Aug 15, '10 From UK Currently Offline Reputation: 0 (0%) |
Hi folks...run into a bit of a problem. My Celica has been standing for over 1 year so using it as a restoration project.
I have run into a problem in that my "air flow" control lights on my centre console and my electric windows have constant power to them. I have checked all fuses and have found I need to remove the ALT-S fuse from under the bonnet to stop this problem. My question is has anyone else come across such a problem or any idea how to remedy it? Thanks in advance...the following 2 pics show the lights being on and the fuse I removed. Chris ![]()
This post has been edited by CelicaHD2: Aug 15, 2010 - 1:40 PM |
![]() |
Aug 20, 2010 - 12:36 PM
|
|
|
Enthusiast ![]() Joined Aug 15, '10 From UK Currently Offline Reputation: 0 (0%) |
Afraid not...all soldering for Blue LED conversion was done a long time ago now and been running good. I did take the unit out again to double check and it all looks fine.
I'm wondering if there is a short from under the bonnet...maybe something a wire has rusted and caused it? Apparantly the ALT-S fuse is a permanent live feed...so looks like a short somewhere. Thanks...Chris |
CelicaHD2 Power To Air Flow Lights And Power To Windows Constantly On? Aug 15, 2010 - 1:08 PM
Batman722 they are supposed to be lit up all the time. Aug 15, 2010 - 11:37 PM
CelicaHD2 Thanks for the reply.
Sorry but I should have men... Aug 16, 2010 - 4:20 AM
solidxsnake QUOTE (CelicaHD2 @ Aug 16, 2010 - 5... Aug 16, 2010 - 9:35 AM
CelicaHD2 Hiya...thanks for the advice. In my first post I h... Aug 16, 2010 - 2:05 PM
solidxsnake QUOTE (CelicaHD2 @ Aug 16, 2010 - 3... Aug 18, 2010 - 9:54 AM
CelicaHD2 I think you're right solidxsnake...but I also ... Aug 18, 2010 - 12:45 PM
freddy121389 could possibly a soldering issue? maybe some of t... Aug 19, 2010 - 9:51 PM![]() ![]() |
| Lo-Fi Version | Time is now: November 22nd, 2025 - 10:48 AM |