![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() Joined Oct 16, '02 From Hohenwald, Tennessee Currently Offline Reputation: 1 (100%) ![]() |
one of my CV joint boots has decided to start throwing grease all over the place. i'm kind of afraid to go searching around for how much a shop would charge to replace them. the parts alone are gonna be like $160.
would it be worth my time to just do it myself? I like workin on my car, but i don't wanna get myself into something that i'm gonna regret after i get started. or maybe I'll just get John to do it ![]() btw, i'm going to replace the joints AND the boots on both sides of the car This post has been edited by Delta_Phoenix: Jan 10, 2004 - 8:22 PM |
![]() |
![]() |
|
![]() Moderator ![]() ![]() ![]() ![]() ![]() Joined Oct 1, '02 From fall river, ma Currently Offline Reputation: 13 (100%) ![]() |
yea, you'll be MUCH better off replacing the whole axel..(i just did both sides on my car.) its really not too hard....as long as your tranny seals dont need replacing...
you can get remanufactured axels for like 70$ each. ![]() -------------------- Former Team 5SFTE pro member ;)
![]() 13.6@108MPH, 5SFTE Powered |
![]() ![]() |
Lo-Fi Version | Time is now: July 25th, 2025 - 7:44 AM |