 Installation question, For automatics |
 Aug 14, 2010 - 6:39 PM
|
 
|
|
Enthusiast  Joined Jun 11, '10 From Los Angeles Currently Offline Reputation: 1 (100%)  |
Hey,
I just got that stupid little plastic trim piece that covers the hole around the shifter for an automatic (thanks Mike) but I don't know how to get it in. Do I take off the top part of the shifter? Does anyone have any idea? Any help would be awesome cuz I dropped another quarter down there today on my way through tolls... Thanks! |
 |
Replies
|
Aug 26, 2010 - 10:28 AM
|
|
|
Enthusiast Joined Apr 20, '09 Currently Offline Reputation: 4 (100%) |
Right, that's the one. First you pull the trim with the cigarette lighter/pocket/etc up. Move the gear selector to L or 2, pull up on that piece of trim, and then pull it out and disconnect the wires for the cigarette lighter/light. Then that piece can come out entirely. From here, you have to pull the center console (two 13mm bolts inside the console and two tabs on the lower-dash plastic). Then you can pull the lower dash, which I haven't done personally, but instructions are above (remove under the steering wheel trim, unscrew 10mm bolt, remove glovebox, unscrew other 10mm bolt, pull out lower dash). There are a couple screws between the two seats facing in towards the center on the side of each piece of the lower dash as well, those need to come out.
-------------------- ~Moving on to a 2002 Corolla S~ R.I.P Tom Celica - 1994-2010 |
Posts in this topic
jtmlb3k Installation question Aug 14, 2010 - 6:39 PM
jtmlb3k Bump...wanna get it in before the lady friend come... Aug 16, 2010 - 6:17 AM
mgnt232 BUMP for you
I dont have an auto so im not rlly s... Aug 16, 2010 - 9:48 AM rave2n I dunno if we are thinking of the same thing...
B... Aug 16, 2010 - 9:50 AM beastman If you can, try to post a picture of what you are ... Aug 17, 2010 - 8:11 AM zfjohnson07 ive never tried taking it off. i think hes talking... Aug 17, 2010 - 7:49 PM solidxsnake You have to pull apart the whole dash to get all o... Aug 17, 2010 - 9:46 PM mkernz22 QUOTE (solidxsnake @ Aug 17, 2010 - 10... Aug 17, 2010 - 11:56 PM solidxsnake QUOTE (mkernz22 @ Aug 18, 2010 - 12... Aug 18, 2010 - 9:52 AM beastman I just found out what part you are talking about. ... Aug 18, 2010 - 7:45 AM jtmlb3k Thanks for the help. This seems like it's gonn... Aug 18, 2010 - 8:23 AM zfjohnson07 ha ha when i bought my car and i looked under the ... Aug 18, 2010 - 5:41 PM JuMPiiN Im not exactly 100% sure what your talking about..... Aug 18, 2010 - 6:08 PM kavy I do mine like this:
1)Pull the gear all the way b... Aug 18, 2010 - 10:45 PM jtmlb3k Thanks everyone for the feedback, but I'm stil... Aug 20, 2010 - 9:04 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 9th, 2025 - 3:58 PM |