 Shifter Cable Change |
 Aug 26, 2010 - 2:46 PM
|
 
|
|
Enthusiast  Joined Sep 11, '08 From Surrey Unitedkingdom Currently Offline Reputation: 1 (100%)  |
Have to change the shifter cables on my G6 convertible from GT type to ST205 GT4 type. By those who have done it, whats involved and is there anything I should look out for?? Your input will be very helpful - thanks. |
 |
Replies
|
Aug 26, 2010 - 4:34 PM
|
|
 Enthusiast Joined Feb 24, '07 From Oahu, Hawaii Currently Offline Reputation: 23 (100%) |
205 cables dont work with the 204.
to remove 204 cables its just the pins holding the ends on the gear selector arms inside the engine bay, the pins holding the other ends on the shifter assembly inside the cabin, and some bolts under the car right about your exhaust. there should be a head sheild that you can take off. pretty self explanitory once you get down there and start tracing when the cables go. -------------------- I don't normally drive fast, but when I do its on a curvy section of this island
 |
Posts in this topic
jeffrosie Shifter Cable Change Aug 26, 2010 - 2:46 PM
jeffrosie I'm sure people on here using the MR2 turbo tr... Aug 28, 2010 - 6:38 AM jeffrosie Done, direct swap - couldn't be easier
As you... Aug 28, 2010 - 11:14 AM Supersprynt MR2 tranny is E153.
Pull the pins, remove the cab... Aug 28, 2010 - 11:45 AM
jeffrosie E153 it is, my bad.
Shift is nice and smooth wity ... Aug 28, 2010 - 3:30 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: January 17th, 2026 - 6:58 PM |