FS...GEN3 ST205 SWAP, WITH PLUG AND PLAY ENGINE HARNESS, NO WIRING NEEDED Options

[_Jim_]

I have 3 ST205 GEN3 3SGTE's in stock and up for sale.

These engines will come with everything needed to drop into your 6th Gen Celica. They come complete with an uncut wiring harness, complete Water to Air intercooler system, map sensor, igniter, coil, etc. I am also offering a free wiring harness conversion that will make installing this engine into your 6GC plug and play. There will be no wiring needed on your end. Just remove your engine, install this 3sgte with professionally converted harness, and start the car. No more tracing wiring gremlins, or have a check engine light for code 54, all these have been taken care of!!!

I am also going to be throwing in an upgraded Water to Air intercooler system. Efficient enough to support 500+hp. It will come with a LARGE 24x12 heat exchanger, upgraded Bosch pump with wiring adapter, pump mounting kit, and all necessary fittings.

You will also be receiving a performance 3.5" after market intake at no additional cost.

This is truly the most complete, plug and play 3sgte engine set on the market today....and as always, comes with free shipping and 90 day warranty on block and head to be free of defect. All engines are compression checked before being shipped to assure a quality, healthy motor.

Price for the complete GEN3 ST205 3sgte with plug and play harness conversion, 3.5" intake, upgraded Water to Air Intercooler system efficient enough to withstand 500hp

TOTAL
2800.00 WITH FREE SHIPPING anywhere in the continental US


Total with everything listed above minus the Water to Air intercooler system:
(Perfect for those looking to run a Front Mount Intercooler)

2500.00 with free shipping

[Axel04]

Were are the pic's at bro!!!!

[_Jim_]

Were are the pic's at bro!!!!

There coming soon Axel. I recently purchased myself a 1993 Celica Alltrac that me and my brother are putting together as we speak. I purchased the car with the orignal engine completly dismantled and only hanging from one out of the 4 engine/tranny mounts. (I have pics, I will need to post them up).

So we are in the process of dropping in one of my GEN3 3sgtes that I offer for sale here to the community. I will post pics of the engine, wiring harness, the head with the valve cover off, the upgraded performance W2A IC system, and the performance 3.5" intake that all comes standard with my engine sets. With the new performance upgrades, and the plug and play harness I will show how easy it is to drop one of my engine sets in, and the lack of need to source parts that come missing with other engine sets. I wont be using anything from my shop other then a 20G turbo kit that I built myself. This will show that my engine sets are truly the most complete, clean, plug and play 3sgte engine sets available today, as I am starting with a car that literally has no motor to speak of. Again, I will only be using parts from THE SAME engine sets I offer to the community, and nothing else (other then an upgraded 20G turbo, GSC GEN3 S1 performance cam shafts, and an act 6 puck clutch....these are all purely upgrades and are not/were NOT needed)

Stand by for pictures...

This post has been edited by _Jim_: Sep 3, 2010 - 11:39 AM