Sep 4, 2010 - 4:17 PM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Jul 27, '06 From Soda Currently Offline Reputation: 9 (91%) |
Ok so I think I pulled and twisted a bit too hard and the boot near the tranny is ripped. Im able to get the other half of the axle out but the other half is stuck to the tranny! Barely any grip. How do I go about taking it apart? Thanks
-------------------- |
![]() |
Sep 4, 2010 - 4:24 PM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Jul 27, '06 From Soda Currently Offline Reputation: 9 (91%) |
Btw, this is on driver side.
-------------------- |
block DrivEr side axle stuck! Sep 4, 2010 - 4:17 PM
cyberblader1130 use a pry bar to pry it out. i had to do it with ... Sep 4, 2010 - 5:34 PM
blu94gt After doing it a few times I've found the easi... Sep 4, 2010 - 5:45 PM
block fcuk it. 2 hours of prying that sh!t out and ... Sep 4, 2010 - 9:02 PM
njccmd2002 doing it the wrong way. dont pry. place the pry ... Sep 5, 2010 - 3:22 PM
Spider77 Just did this. Slide hammer with puller attachmen... Sep 5, 2010 - 4:32 PM![]() ![]() |
| Lo-Fi Version | Time is now: January 18th, 2026 - 3:54 PM |