Sep 4, 2010 - 4:17 PM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Jul 27, '06 From Soda Currently Offline Reputation: 9 (91%) |
Ok so I think I pulled and twisted a bit too hard and the boot near the tranny is ripped. Im able to get the other half of the axle out but the other half is stuck to the tranny! Barely any grip. How do I go about taking it apart? Thanks
-------------------- |
![]() |
Sep 4, 2010 - 5:45 PM
|
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Mar 23, '05 From Kansas City Currently Offline Reputation: 0 (0%) |
After doing it a few times I've found the easiest way is to get a pry bar wedged in there and hit it with a sledgehammer. I pried and pried and pried on one then tried the hammer method, 2 hits and it was out.
-------------------- 1999 Celica GT
![]() |
block DrivEr side axle stuck! Sep 4, 2010 - 4:17 PM
block Btw, this is on driver side. Sep 4, 2010 - 4:24 PM
cyberblader1130 use a pry bar to pry it out. i had to do it with ... Sep 4, 2010 - 5:34 PM
block fcuk it. 2 hours of prying that sh!t out and ... Sep 4, 2010 - 9:02 PM
njccmd2002 doing it the wrong way. dont pry. place the pry ... Sep 5, 2010 - 3:22 PM
Spider77 Just did this. Slide hammer with puller attachmen... Sep 5, 2010 - 4:32 PM![]() ![]() |
| Lo-Fi Version | Time is now: January 18th, 2026 - 1:04 AM |