Sep 7, 2010 - 10:49 PM
|
|
|
Enthusiast ![]() ![]() ![]() Joined Sep 19, '08 From Michigan Currently Offline Reputation: 4 (75%) |
Guys, I have a 3 post wing and I can't take it off. I removed the nuts and gave the studs a healthy whack with a drift punch. Nothing.
Any trick to getting it off? Everything is stock and wing has never been removed before. This post has been edited by dgbldr: Sep 7, 2010 - 10:49 PM |
![]() |
Sep 7, 2010 - 10:52 PM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() Joined Mar 7, '10 From Ft. Lauderdale Currently Offline Reputation: 9 (100%) |
Guys, I have a 3 post wing and I can't take it off. I removed the nuts and gave the studs a healthy whack with a drift punch. Nothing. Any trick to getting it off? Everything is stock and wing has never been removed before. when i was first taking mine off, i came across the same problem, it is glued on, and there is 2 clips holding it on, just give it a good yank and it should pop right off. remember, there is 2 bolts on the left, 2 on the right, and one in the middle. there is one clip on the right side closest to the back, and the other on the right, closest to the back. This post has been edited by Zake: Sep 7, 2010 - 10:54 PM -------------------- |
dgbldr Stuck wing Sep 7, 2010 - 10:49 PM
dgbldr I did give it a good yank. I could see the trunk s... Sep 8, 2010 - 12:53 AM
njccmd2002 fishing line.
use it to cut the rubber. put it ... Sep 8, 2010 - 1:32 AM
dgbldr Thanks. That did it. Very thin fishing line, lots ... Sep 10, 2010 - 6:25 PM
whatthe Video of this drift punch?!? Sep 12, 2010 - 1:41 PM
mak5603 QUOTE (whatthe @ Sep 12, 2010 - 1:41... Sep 12, 2010 - 2:34 PM
dgbldr Video? Do you mean you want to see what a drift pu... Sep 12, 2010 - 8:44 PM
ZGear QUOTE (dgbldr @ Sep 12, 2010 - 6:44 ... Sep 12, 2010 - 9:17 PM![]() ![]() |
| Lo-Fi Version | Time is now: November 9th, 2025 - 11:52 AM |