![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Mar 7, '10 From Ft. Lauderdale Currently Offline Reputation: 9 (100%) ![]() |
this will be the thread that il post the progress of my 96' celica as it comes along.
here is some pics of the car as it was in march-2010 ![]() ![]() ![]() when i got the car, the dash lights were burnt out, soo i fixed it. ![]() then i went to cleaning the inside. (previous owner left it horrific..) ![]() ![]() while i was doing that, i decided to de-badge the rear right after i took them off (un-cleaned) ![]() and after i cleaned it up ![]() ![]() ![]() i think this would be a nice spot for the now "homeless" badges (please excuse the dirty carpet in the trunk, when i vacuumed, it wasn't in the car) ![]() This post has been edited by Zake: May 16, 2012 - 10:02 PM -------------------- |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Dec 26, '09 From Albuquerque, NM Currently Offline Reputation: 19 (100%) ![]() |
Bro, question. How did you debadge the rear without scratching the paint? Also, what'd you use to clean afterwards? I've been wanting to do this for SO long but have been afraid of scratching.
-------------------- taking too long to mod since '09
June '12 COTM '95 AT200 |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Mar 7, '10 From Ft. Lauderdale Currently Offline Reputation: 9 (100%) ![]() |
Bro, question. How did you debadge the rear without scratching the paint? Also, what'd you use to clean afterwards? I've been wanting to do this for SO long but have been afraid of scratching. i used my credit card when the sun was hitting it. (heat gun would work too) and to get the junk off the paint, i used wet paper towels and a lot of elbow-grease. im sure there is an easier way than that.. -------------------- |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Dec 26, '09 From Albuquerque, NM Currently Offline Reputation: 19 (100%) ![]() |
i used my credit card when the sun was hitting it. (heat gun would work too) and to get the junk off the paint, i used wet paper towels and a lot of elbow-grease. im sure there is an easier way than that.. Interesting, I'll try that tomorrow. And I'd love to use Goo Gone but I have no idea if that'll eat paint. -------------------- taking too long to mod since '09
June '12 COTM '95 AT200 |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Mar 7, '10 From Ft. Lauderdale Currently Offline Reputation: 9 (100%) ![]() |
i used my credit card when the sun was hitting it. (heat gun would work too) and to get the junk off the paint, i used wet paper towels and a lot of elbow-grease. im sure there is an easier way than that.. Interesting, I'll try that tomorrow. And I'd love to use Goo Gone but I have no idea if that'll eat paint. come to think of it, i think i used bug and tar remover. but it still took a long time and i ended up getting blisters, but it was worth it. iv never used goo gone on paint before, i wouldn't think it was do harm. but I'm not sure. This post has been edited by Zake: Sep 12, 2010 - 9:47 PM -------------------- |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Dec 26, '09 From Albuquerque, NM Currently Offline Reputation: 19 (100%) ![]() |
come to think of it, i think i used bug and tar remover. but it still took a long time and i ended up getting blisters, but it was worth it. iv never used goo gone on paint before, i wouldn't think it was do harm. but I'm not sure. Holy sh!t, blisters?! How long were you working?! And I just went to walmart and tugged on the Toyota one with my hand and it popped right off haha. -------------------- taking too long to mod since '09
June '12 COTM '95 AT200 |
![]() ![]() |
Lo-Fi Version | Time is now: June 11th, 2025 - 4:42 PM |