no horn on the 7 gen steering wheel, different horn connection Options

[cyprus_gt]

HI to everybody
ok so i just swap the steering wheel of my car and install the 7 gen steering wheel from UK car and the connection for the horn is totaly different!!!my car is JDM celica and have the following one...:(my old wheel don't have airbag)


there is the 7gen steering wheel from the back:(new one have airbag)


as you can see there is no circle plate like the 6 gen one and can not make the connecton when ineed to use the horn!
so if someone have idea PLEASE to help me
thanks

cheers

Dimitri

p.s.
i can not use the old plate circle becouse i just sold the old wheel here...and if i make one i can not keep it in the new wheel

This post has been edited by cyprus_gt: Sep 25, 2010 - 7:06 AM

[mkernz22]

I believe you might need to take that small white plastic ring off too because your clock spring is different then the US ones. I believe I will need that piece so my setup will work. If you pay shipping, I can send you a US 6th clock spring (if it is compatible with the 7th gen steering wheel.)

That's just my thought, if anyone absolutely knows, please feel free to correct me.

This post has been edited by mkernz22: Sep 26, 2010 - 5:33 AM

[cyprus_gt]

I believe you might need to take that small white plastic ring off too because your clock spring is different then the US ones. I believe I will need that piece so my setup will work. If you pay shipping, I can send you a US 6th clock spring (if it is compatible with the 7th gen steering wheel.)

That's just my thought, if anyone absolutely knows, please feel free to correct me.

can you sen me a picture of the clock spring that you have?

thanks