Sep 25, 2010 - 5:53 PM
		 | 
		
			
			 | 
	
| 
		    
				
				
				
				
				
				
        	
        	 Enthusiast ![]() ![]() ![]() Joined Dec 9, '08 From Blainville Currently Offline Reputation: 4 (100%)  | 
       
			
			 
				I really love my car and plan on keeping it. I don't wanna sell it, never. 
			
			
					
		It's not something that I plan on doing soon cause I'm broke, but in a few years I will have my real job and I will probably work as a mecanical engineer and I may also have my mecanic's diploma. I was wondering how difficult it would be to get from Fwd to Rwd? Could I just take the transmition and rear differencial from an Mr2 (which has the same engine which is good!) and I guess probably the cv axles and probably the suspention/steering-related parts like the tie rod ends and stuff and make them fit together and Voila? I'm not good enoght right now to know what I shall do to do this conversion, but I will eventually go to school after I get my engineer diploma to learn all about mecanics. (I plan on having a Rwd Celica and a 4wd Gt-Four later. I don't wanna buy a gt-four and convert it to rwd cause this way I would have to buy 2 gt-fours in the end. I'd rather get my Fwd Gts to rwd and then, later, buy a Gt-Four. So please don't tell me to buy a Gt-Four because ''it would be easier to swap'' Do you think it would be this ''simple'' or would I need to do a lot more things to get the rear wheels spinning? I guess a celica would be easier than other cars to convert since there are a lot of bolt-on parts between the celica-mr2-gt4, am I right? Well, thanks to those who answer me! This post has been edited by dudeofchaos: Sep 25, 2010 - 5:53 PM  | 
	
![]()  | 
	
			
			   Sep 29, 2010 - 7:34 PM
		 | 
		
			
			 | 
	
| 
		    
				
				
				
				
				
				
        	
        	 Enthusiast ![]() ![]() ![]() ![]() ![]() Joined May 10, '10 From MA Currently Offline Reputation: 37 (100%)  | 
       
			
			 
				also with the beams, you could turbo it, it wouldn't be that hard at all.
				
				
				
			 
			
			
					
		 | 
	
			
			   Sep 29, 2010 - 10:29 PM
		 | 
		
			
			 | 
	
		    
				
				
				
				
				
				
        	
        	![]() Enthusiast ![]() ![]() ![]() Joined Jul 9, '04 From Las Vegas USA Currently Offline Reputation: 14 (100%)  | 
       
			
			 also with the beams, you could turbo it, it wouldn't be that hard at all. Why would you turbo a high compression motor, instead of just installing one that is factory set up with turbo (3sgte) which cost less than a beams anyway. You could do 4age or 4agze. -------------------- ![]()  | 
	
 dudeofchaos   How difficult do you think it would be to get from Fwd to Rwd?   Sep 25, 2010 - 5:53 PM
 
 JuMPiiN   Simple, no. Anything is possible with money availa...   Sep 25, 2010 - 6:06 PM
 
 dudeofchaos   QUOTE (JuMPiiN @ Sep 25, 2010 - 7:06...   Sep 25, 2010 - 10:37 PM
 
 njccmd2002   Ok, why not buy an mr2 and do the front end celica...   Sep 25, 2010 - 6:11 PM
 
 JuMPiiN   QUOTE (njccmd2002 @ Sep 25, 2010 - 6...   Sep 25, 2010 - 6:13 PM
 
 dudeofchaos   QUOTE (njccmd2002 @ Sep 25, 2010 - 7...   Sep 25, 2010 - 6:14 PM
 
 playr158   oh man...have i ever been in your spot 
Cut the f...   Sep 25, 2010 - 6:13 PM
 
 JuMPiiN   All I have to say is goodluck, risk isnt worth rew...   Sep 25, 2010 - 6:18 PM
 
 dudeofchaos   QUOTE (JuMPiiN @ Sep 25, 2010 - 7:18...   Sep 25, 2010 - 6:23 PM
 
 azian_advanced   sounds like a big task.. you best to start practic...   Sep 25, 2010 - 8:57 PM
 
 njccmd2002   ^^^^  nice heater!!!  good for cold we...   Sep 25, 2010 - 9:50 PM
 
 whatthe   How loud would that be haha.   Sep 25, 2010 - 10:06 PM
 
 dudeofchaos   I'm mostly looking to keep the engine in the f...   Sep 25, 2010 - 10:33 PM
 
 mkernz22   He thought you were going to do a mid engine at fi...   Sep 25, 2010 - 10:48 PM
 
 njccmd2002   first of all 
1.  do you want  
A:  transverse mo...   Sep 25, 2010 - 11:13 PM
 
 richee3   RWD Celica? You COULD do it yourself... Or you cou...   Sep 26, 2010 - 4:49 AM
 
 95celicastLSR   you could just do the gt4 conversion and modify th...   Sep 26, 2010 - 10:52 AM
 
 dudeofchaos   I know, but since I will eventually make money lat...   Sep 26, 2010 - 7:00 PM
 
 JuMPiiN   If you want it so badly..... buy a MR2 or somekind...   Sep 26, 2010 - 7:37 PM
 
 Smaay   celicas were all RWD untill the 5th gen or was it ...   Sep 26, 2010 - 8:02 PM
 
 dudeofchaos   QUOTE (Smaay @ Sep 26, 2010 - 9:02 P...   Sep 26, 2010 - 9:40 PM
 
 mkernz22   5th gens were fwd
best of my luck to you man if y...   Sep 26, 2010 - 8:15 PM
 
 dudeofchaos   QUOTE (mkernz22 @ Sep 26, 2010 - 9:1...   Sep 26, 2010 - 9:44 PM
 
 hatchy_gt-s   Sorry to tell u this but no u won't have thw f...   Sep 27, 2010 - 9:09 AM
 
 b1gr3d   Best thing to do is get a rwd donor that has or us...   Sep 27, 2010 - 9:23 AM
 
 Smaay   ok if you really want to go RWD its not that hard....   Sep 27, 2010 - 9:51 AM
 
 RUNNIN-LOW   QUOTE (hatchy_gt-s @ Sep 27, 2010 ...   Sep 27, 2010 - 9:56 AM
 
 dudeofchaos   Oh, too bad if I'm not the 1st one then. I...   Sep 28, 2010 - 9:12 AM
 
 czwalga   Ehh, don't start planning stuff out that far a...   Sep 28, 2010 - 10:09 AM
 
 dudeofchaos   QUOTE (czwalga @ Sep 28, 2010 - 10:0...   Sep 28, 2010 - 5:26 PM
 
 czwalga   QUOTE (dudeofchaos @ Sep 28, 2010 - 5...   Sep 29, 2010 - 6:00 AM
 
 JuMPiiN   You shall change your mind ! haha jk, good luc...   Sep 28, 2010 - 8:53 PM
 
 dudeofchaos   QUOTE (JuMPiiN @ Sep 28, 2010 - 8:53...   Sep 29, 2010 - 2:52 PM
 
 richee3   The 3S-GE Blacktop BEAMS came in the Toyota Altezz...   Sep 29, 2010 - 4:41 PM
 
 JuMPiiN   Exactly what he said above.   Sep 29, 2010 - 4:52 PM
 
 BonzaiCelica   probably be better off buying a coroll ae86 and do...   Sep 29, 2010 - 6:21 PM
 
 Johnnyny   QUOTE (mkernz22 @ Sep 29, 2010 - 8:3...   Sep 29, 2010 - 7:53 PM
 
 BonzaiCelica   QUOTE (Johnnyny @ Sep 29, 2010 - 8:5...   Sep 29, 2010 - 9:54 PM
 
 mkernz22   so i guess i shouldn't have mentioned that lol...   Sep 29, 2010 - 9:56 PM
 
 coldbluesteel   Well, I understand exactly where your coming from....   Sep 29, 2010 - 10:25 PM
 
 dudeofchaos   QUOTE (coldbluesteel @ Sep 29, 2010 - 11...   Sep 30, 2010 - 8:12 PM
 
 mkernz22   just forget i even mentioned it lol   Sep 29, 2010 - 10:34 PM
 
 SwissFerdi   QUOTE (mkernz22 @ Sep 29, 2010 - 11...   Sep 30, 2010 - 8:45 AM
 
 blu94gt   QUOTE (czwalga @ Sep 28, 2010 - 10:0...   Sep 30, 2010 - 1:04 AM
 
 dudeofchaos   QUOTE (blu94gt @ Sep 30, 2010 - 2:04...   Sep 30, 2010 - 8:09 PM
 
 azian_advanced   you should definitely join if you haven't alre...   Oct 1, 2010 - 2:36 AM
 
 dudeofchaos   QUOTE (azian_advanced @ Oct 1, 2010 - 3...   Oct 1, 2010 - 6:38 PM![]() ![]()  | 
	
| Lo-Fi Version | Time is now: November 4th, 2025 - 10:05 AM |