Oct 10, 2010 - 6:50 PM
|
|
|
Enthusiast Joined Mar 28, '10 From Grande Prairie, Canada Currently Offline Reputation: 0 (0%) |
after having this clunking sound coming from my front end after hitting bumps or rough roads, i replaced the figure 8 joints. while instling them i checked all the ball joints and everything seemed well. after installing them the noise was still there. when i bough the car the front struts were shot so i ended up replacing them with ksport coil overs(not the highest quality of suspension). does it make sense that the noise is coming from the strut itself? I can sort of hear this noise to the rear as well so. i never did get to drive the car with factory struts so i cant compare.
|
![]() |
Oct 11, 2010 - 9:49 AM
|
|
|
Enthusiast ![]() Joined Mar 30, '09 From Jamaica Currently Offline Reputation: 0 (0%) |
Usually the figure 8 joints and the A arms should be replaced together. If the A arms were checked ad are fine, then the mostly likely culprit would be the crush tube bushing found on the banana arm. These will cause all sort of noise and play, if checked, make sure they're torqued properly.
|
dougone81 clunking sound Oct 10, 2010 - 6:50 PM
dougone81 it is the crush tube bushing i just checked..would... Oct 12, 2010 - 7:21 PM
Mr_Tee QUOTE (dougone81 @ Oct 12, 2010 - 7... Oct 13, 2010 - 8:22 PM
chacha don't mean to steal your thread...but i have a... Oct 13, 2010 - 11:36 PM
hatchy_gt-s QUOTE (chacha @ Oct 14, 2010 - 12:36... Oct 14, 2010 - 2:12 AM
chacha i checked as best as i could...couldn't find i... Oct 14, 2010 - 8:50 PM
BonzaiCelica what is the point of upgrading that crush tube. an... Oct 15, 2010 - 2:39 AM
dougone81 check out this link and the rush tube is on the en... Oct 16, 2010 - 12:02 PM![]() ![]() |
| Lo-Fi Version | Time is now: November 22nd, 2025 - 5:13 AM |