 Rough Idle, Varies between 650 and 900rpm. |
 Oct 12, 2010 - 11:33 PM
|
 
|
 Enthusiast  Joined Dec 9, '08 From Blainville Currently Offline Reputation: 4 (100%)  |
My idle varies between 650 and 900 rpm and is a bit rough (The steering wheel is quite shaky), but as soon as I give it some gas (Just a LITTLE, around 950-1000rpm or more) it becomes a lot smoother and the steering wheel stops shaking.
I was wondering if changing the fuel filter and reseting the ECU could solve the problem? Thanks! This post has been edited by dudeofchaos: Oct 12, 2010 - 11:34 PM |
 |
Replies
|
Oct 13, 2010 - 1:07 AM
|
|
 Enthusiast Joined Dec 26, '09 From Albuquerque, NM Currently Offline Reputation: 19 (100%) |
You should be able to adjust the idle speed via a small screw on the TB. I read that in my Haynes repair manual.
-------------------- taking too long to mod since '09
June '12 COTM '95 AT200 |
Posts in this topic
dudeofchaos Rough Idle Oct 12, 2010 - 11:33 PM
fgvillegas you could try that. it works sometimes.
you could... Oct 13, 2010 - 12:20 AM SupraKid Check your plugs, and clean/replace them if needed... Oct 13, 2010 - 1:01 AM
dudeofchaos QUOTE (SupraKid @ Oct 13, 2010 - 2:0... Oct 13, 2010 - 1:14 AM fgvillegas QUOTE (dudeofchaos @ Oct 13, 2010 - 2... Oct 13, 2010 - 1:26 AM dubb_head QUOTE (fgvillegas @ Oct 13, 2010 - 2... Oct 13, 2010 - 7:42 AM HectortheRican QUOTE (dudeofchaos @ Oct 13, 2010 - 12... Oct 14, 2010 - 1:18 PM d3ath2009 try a new distributor cap and rotar button Oct 13, 2010 - 8:32 AM DEATH QUOTE (d3ath2009 @ Oct 13, 2010 - 8... Oct 13, 2010 - 3:49 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: June 2nd, 2025 - 11:32 PM |