 Water / oil " normal " temperatures, your input needed ! |
 Oct 12, 2010 - 2:49 PM
|
 
|
 Enthusiast  Joined Apr 17, '06 From New Jersey Currently Offline Reputation: 105 (100%)  |
I have a 3rd gen 3sgte with berk tech downpipe, 3" exhaust system, running ~ 15 psi at the moment. since day one I have had my eyes glued to my oil temperature / pressure gauges. it has been always ~ 210 degrees F ( ~ 99C ) once the car is warmed up lately I've seen my olil temperature get up to ~ 220-230F ( 104-110 C ) while cruising at ~ 2500 rpms I'm using Mobil 1, I'm trying to understand why I'm getting hotter readings than before at the same crusing rpms with no changes on my setup. also what's the " safe " range for the oil temperature to be ? I know the 3s has an oil cooler that uses coolant to cool the oil down, so I checked my coolant level and is fine, I'm not leaking / losing any coolant. any input on this ? --------------------  |
 |
Replies
|
Oct 14, 2010 - 9:49 AM
|
|
 Enthusiast Joined Mar 22, '07 From Houston, TX Currently Offline Reputation: 4 (100%) |
DAMN, that oil is baking
-------------------- QUOTE "And, as always, your friendship, help, and dedication to the advancement of Texas Celica dominance is GREATLY appreciated. Thanks bro." -DEATH 1994 GT: V6 swap, 5speed E53 W/ LSD, All Power, now RED 1995 ST: SOLD @273k miles, Auto, all power, CarPC, White 1994 ST: Totaled, 5spd, all power, Red RIP 07/09/09 @ 241,810 1994 Lexus LS400: This is my new DD |
Posts in this topic
Culpable04 Water / oil " normal " temperatures Oct 12, 2010 - 2:49 PM
DEATH I've got no input as to the temps but the Oil ... Oct 12, 2010 - 2:59 PM presure2 that does seem a bit on the hot side to me stevens... Oct 12, 2010 - 3:16 PM
DEATH QUOTE (presure2 @ Oct 12, 2010 - 3:1... Oct 12, 2010 - 3:23 PM Culpable04 the temperature normally rises when I get on it, b... Oct 12, 2010 - 4:20 PM BriinumsBo 110 C was quite normal cruising at 100km/h (60mph)... Oct 13, 2010 - 1:16 AM presure2 are you running a water wetter of some sort in you... Oct 14, 2010 - 6:54 AM Culpable04 no, no water wetter, I can probably stop at autozo... Oct 14, 2010 - 8:57 AM Culpable04 ok, so I've been searching all over the place ... Oct 14, 2010 - 9:08 AM presure2 lol, i was just about to post the same, stevenson.... Oct 14, 2010 - 9:14 AM klue QUOTE (presure2 @ Oct 14, 2010 - 9:1... Oct 14, 2010 - 12:09 PM Culpable04 this is a very good excuse to use Synthetic oil on... Oct 14, 2010 - 9:54 AM DEATH Guys - Please note the locations of your oil temp ... Oct 18, 2010 - 10:44 AM klue good point, Im taking my measurements from the cyl... Oct 19, 2010 - 4:15 PM Culpable04 my temperature probe in right on top of the oil fi... Oct 19, 2010 - 4:20 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: July 18th, 2025 - 4:56 PM |