![]() |
![]() |
![]() |
|
Enthusiast Joined Jul 29, '10 From norwoord, MA Currently Offline Reputation: 0 (0%) ![]() |
I have an ST, but the auto parts store asked if i had ABS or not? how do I tell?
I searched the forum for bit but found nothing ![]() thanks! |
![]() |
![]() |
|
Enthusiast Joined Jul 29, '10 From norwoord, MA Currently Offline Reputation: 0 (0%) ![]() |
I dont have abs, looked for the box and found nothing, turned the key, and no abs light.
this isnt my dd, but i'm trying to replace like everything possible. I got a new master, and 2 new calipers (and pads). bench bled the master and then bled the brakes from furthest to closest... but they stillll! feel mushy ![]() Any ideas? Im going to bleed them again tomorrow when its bright out, but I just dont know what else could be wrong? As far as i can tell there are no leaks in the system. I left it over night with paper under it, and actually pressed the brakes a few different times to see if it would force any fluid out...And no fluid or wet signs were on the floor or the wheels after a day. So I dont think there is a leak? Is it possible to have a small enough leak where fluid doesnt get out, but air can get in? thanks again for any help, need the basics to be functional before I can really get "into" the car ![]() |
![]() ![]() |
Lo-Fi Version | Time is now: July 18th, 2025 - 4:19 AM |