Evolving into a Celestial Dragon, a 3SGTE Swap (Pictures in Album) Options

[Soulend]

Hey everyone,

I finally got my 3SGTE engine and am finding my self both excited and over whelmed. I don't know much about cars, but I'm wanting to work and learn for this beautiful car. so I'll post pictures and questions about the process. so with out further adu...

3SGTE Swap Pictures

Tell me your opinions, and what to look out for!

Thanks,
Soul

[presure2]

i need some CLEAR pictures, taken from directly above the mounts.

when i install these setups, i usually lower the motor into the car using 16 chain links on the drivers side, and ~5 on the passanger, and get the tranny down and under the frame rail.
once its there, i put the drivers side tranny mount into the frame rail bracket, then raise the tranny into place with a jack and install the bolts that hold the mount to the tranny bracket.
then the passanger side mount you can just raise the engine into place, the mount should fall right into place with a bit of wiggling, then the front and rear by rotating the motor.
take the front to back crossmember off, support the motor, take the passanger mount off, and start again.