Car Progress Thread v2.0, Replacing rusted out quarter panel... yay body work. Options

[jcbass7]

Well you've got to start somewhere and this is my second time starting. Nonetheless, the celica's from my past are all part of the story that has led me to this one and finally being able to complete the project I have been dreaming of. They are also contributing a lot of parts and lessons learned to get this car how I want it. I bought this car in September 2010 and will be marking my progress routinely with many pictures.

Here is the baseline. The starting point. The blank Canvas. I'm giving you a full snapshot into its original condition from when I bought it. Flaws and all. This way the you can see the progress it makes as I fix the little details and add the JDM/TRD goodies.

94' Celica GT Hatchback
-Stock 5SFE
-Stock ABS Brakes
-Stock Premium Sound
-Stock Suspension
-Stock Exterior
-Stock Interior


EXTERIOR:











INTERIOR:







UNDER THE HOOD:






Here is the progress thread for my first build a few years back.. Learned a lot on that project:
http://www.6gc.net/forums/index.php?showto...3997&st=280
(A good read if you are bored at work, lots of parts, pics, problems and even a fire)

This post has been edited by jcbass7: Dec 6, 2012 - 10:29 AM

[jcbass7]

Took the CC unit from the coupe apart since Eric (previous coupe owner) had made it blue.. but it started to get testy. I opened it up to find quite the hack job.. wires twisted around the LED posts with no solder or anything. So I ordered the following LED's to do this correctly as well as a few other interior pieces:

(all Blue)
1x 8mm Neo-wedge
3x 10mm Neo-wedge
12x 3mm LED's

Here are the pics of the hack job:




This post has been edited by jcbass7: Oct 29, 2010 - 10:30 AM