![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Dec 9, '08 From Blainville Currently Offline Reputation: 4 (100%) ![]() |
My low beam seal is all loose, it doesn't hold on to the headlight. Is it usually glued to the lamp or just clipped? What type of glue can I use to make it stick to the lamp (unless it only holds by clips)???
My other seal seems all fine and doesn't seem to have any type of glue. But the one that is loose had like some kind of dried glue/whatever product on the inside face. This post has been edited by dudeofchaos: Nov 2, 2010 - 6:17 PM |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Mar 7, '10 From Ft. Lauderdale Currently Offline Reputation: 9 (100%) ![]() |
when i took mine apart to fix a leak, i put it in the oven, it softened the glue enough to un-stick it and stick it back together. so try placing it in your oven at a low temp for a little while, then press the lens onto the plastic housing and wait. i also used some glass sealer around the seal to try to help. and here its been over 7 months and no leaks.
-------------------- |
![]() ![]() |
Lo-Fi Version | Time is now: July 24th, 2025 - 6:33 AM |