 Aircondition, airbag, immobilizer not working, after engine swap |
 Nov 4, 2010 - 1:20 PM
|
 
|
|
Enthusiast  Joined Dec 16, '08 From Norway Currently Offline Reputation: 0 (0%)  |
Hi.
I did a engine swap a while ago, from 7A-FE (euro spec) to 3S-GE (JDM). The st202 donor car with the 3sge, did not have airbag, abs, immobilizer, but mine car have, and it worked before the swap. Also the aircondtion does not seem to work, because the engine idling is not changing when turning it on. There is no gas left but I know on other cars that the engine is working harder even though there is no gas left. There is a green light though on the AC button when turning it on. The ABS seems to work, because the ABS light is working on the dasboard, but not airbag. I changed the engine and the wire harnesses, and all the plugs that goes inside the car was fitting on my car. So my question is, why don't all this functions work? Is it the ECU that is not supporting all the functions, the problem ? This post has been edited by Iceman22: Nov 4, 2010 - 1:22 PM -------------------- - Celica ST202 w/ JDM 3S-GE 180HP (Special LE Subaru Blue steel paint!)
- A video of my car, before & after: Click here |
 |
Replies
|
Nov 5, 2010 - 7:45 PM
|
|
 Enthusiast Joined Jan 29, '07 From Hoyt Lakes, MN Currently Offline Reputation: 11 (100%) |
Well the ecu is from the 3sge with no immobilizer. The ecu isnt programmed to read the security system soo it won't need the key with the chip to start.
-------------------- 98 Celica gt red- totaled deer
94 Celica st black DD (bad weather beater)- totaled deer 95 Celica gt silver- chassis sold 88 Celica All-Trac (Burned to a crisp) 94 Celica gt white (sold) In need of a rust free chassis!!!! |
Posts in this topic
Iceman22 Aircondition, airbag, immobilizer not working Nov 4, 2010 - 1:20 PM
mkernz22 Just to point out one thing, if your ABS light is ... Nov 4, 2010 - 2:08 PM Iceman22 Yeah, but it turns off when the engine turns on, i... Nov 4, 2010 - 4:28 PM bccentaur3 Did you replace the dash harness too? Or did you j... Nov 4, 2010 - 7:30 PM Iceman22 Only engine and engine harnesses.
The plugs that g... Nov 4, 2010 - 7:41 PM chacha ecu? Nov 4, 2010 - 10:08 PM Iceman22 ECU has also been swapped ofcourse, using the 3s-g... Nov 5, 2010 - 9:01 AM
Johnnyny QUOTE (Iceman22 @ Nov 5, 2010 - 10:0... Nov 5, 2010 - 3:05 PM bccentaur3 I don't understand. I thought that if the immo... Nov 5, 2010 - 1:00 PM Iceman22 My car did have immobilizer before the swap, and t... Nov 5, 2010 - 2:43 PM Iceman22 OK, so the immobolizer I need new ECU, or activate... Nov 6, 2010 - 8:49 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: August 26th, 2025 - 3:00 PM |