ChfNix progression thread, The progress of my baby! Options

[ChfNix]

OK, so like it says I have put a lot of money into her and I have only had her a short time, so I will try to update you with what I have done already before I get to the good stuff....

So the first thing was my stereo out of my old car...

Alpine deck


Memphis marine 8's in the doors


Some MB Quart 6.5's in the rear, no pics...

A Rockford Fosgate P3 12 in a custom box


And everything was powered by a Earthquake 900 watt 5 channel amp with a Coustic XM3 crossover and 2, 1 farad Stinger caps, sorry for the ****ty pic, the bright blue LED's were messing with my camera...


And a bad ass alarm which shall remain nameless, but I will say that it has keyless entry, a 2 way pager, remote start, and remote trunk ...

Then a cold air intake...


Then the header...


Then full custom exhaust...






Then TRD quick shift kit and Vincent Doggy arm rest cover, e-brake boot, and shift boot...


Then blue gauges and clock...


Then a new windshield, but I don't have any pics for that...

Then tint...


Rear disc conversion (not installed yet)...


Then a new deck, the top of the line JVC KW-NX7000BT, it has everything, DVD, SD, HD radio, GPS, Bluetooth and Ipod, and you can program it to say whatever you want...



And today we started on the fun stuff!
First had to run 0 gauge wire to the back, the old 4 gauge wasn't going to do!!!


Then Stinger roadkill sound deadening material all over...


We are making a custom fiberglass enclosure to fit in the spare tire well...



And it is going to house the new Memphis CM 12, which is the replacement for the Mojo 12...


Its on the right, next to a normal sub...


And the new Memphis Hybrid amp, the replacement for the big Memphis Belle...





I can't wait!! This is top of the line equipment in a car that is done right by a Master Installer at my local car audio shop: Vibez performance and car audio!

I will keep updating this as my car gets more and more s**t!!!

This post has been edited by ChfNix: Nov 12, 2010 - 12:35 PM

[ChfNix]

Ok, so the week of October second I had 3 days off and I was ready to Install the parts I have accumulated over the past few months.

First a new fender...









Much Better!


Next the sound deadening project! This was a lot of fun, I have never stripped a car of the whole interior and actually put it back in, a great learning experience!

First pulling everything out.











Getting rid of the rattle around the license plate bezel.





Laying down the Stinger Roadkill first.















I didn't get many pics of putting the carpet pad down under the black carpet, but I cut it to size and used 3M spray adhesive to hold it in place.



Then came the black carpet and putting it all back together.

















I also added some Varad HLWX LED color changing tubes, under the dash, under the seats, next to the moon roof, and in the hatch.











I also added the light up ring around the ignition, here is the plug that was under the dash that you plug it into.Its the one on the right, the one on the left is for the factory security system.





I took out the Cusco strut braces and added the TRD front strut brace and a GT-Four rear strut brace.



The emblem that was on it was trashed so I ordered a new one from E-bay...







I got the clear parking lights and side markers from E-Bay, this is what you get, new housings, bulbs, sockets, seals for the side markers, and screws.



Next, pics with the lights off, in the daytime.





Daytime, lights on.







Night time, lights on, flash on.



Night time, lights on, flash off.







I think their totally worth the $85 for the side markers and turn signals!!!

I think that's all for now......

This post has been edited by ChfNix: Nov 7, 2010 - 3:45 PM