 Gutted 6G hatch that could trap 150mph in the 1/4 which brake kit? |
 Nov 18, 2010 - 12:02 PM
|
 
|
|
Enthusiast  Joined Feb 23, '05 From New York Currently Offline Reputation: 0 (0%)  |
as the title states...
I’m looking form something good enough for drag that would be able to stop a 800whp 94-99 body. I am looking into the Ksport front and rears and would like to use 16-17inch rims, however i need to know if there will be enough stopping power and has anyone incorporated a way to get the e-brake to work. my options for 16 inch rims are the 11 or 12 inch kit. if i wanted to go to 15 inch rims i would have to use the 11 inch kit. But I dont know what the stock sized rotors are and if i can get away with the 11 inch kit and run 16 inch rims and there be enough stopping power i would go for it. so my questions are: which of the two kits would be enough to stop my car? what are the dimensions of the stock rotors? Thanks, Eazy This post has been edited by eazy2001x: Nov 18, 2010 - 2:05 PM |
 |
Replies
|
Nov 18, 2010 - 1:23 PM
|
|
 Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
-------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
Posts in this topic
eazy2001x Gutted 6G hatch that could trap 150mph in the 1/4 which brake kit? Nov 18, 2010 - 12:02 PM
azian_advanced how fast will you be going before applying the bra... Nov 18, 2010 - 12:14 PM
eazy2001x QUOTE (azian_advanced @ Nov 18, 2010 - 1... Nov 18, 2010 - 12:47 PM mkernz22 You could do the Supra caliper setup for the brake... Nov 18, 2010 - 12:30 PM eazy2001x QUOTE (mkernz22 @ Nov 18, 2010 - 1:3... Nov 18, 2010 - 12:35 PM 95CelicaST Calipers don't have a lug pattern.
If I may ... Nov 18, 2010 - 12:49 PM eazy2001x QUOTE (95CelicaST @ Nov 18, 2010 - 1... Nov 18, 2010 - 12:55 PM 95CelicaST You aren't using a Supra rotor, just the calip... Nov 18, 2010 - 1:06 PM eazy2001x i am going to run the tein flex which is what i ha... Nov 18, 2010 - 1:15 PM eazy2001x seems that the Wilwood 13" 4 piston would be ... Nov 18, 2010 - 1:20 PM njccmd2002 RE: Gutted 6G hatch that could trap 150mph in the 1/4 which brake kit? Nov 18, 2010 - 1:23 PM eazy2001x come on guys.. help point me in the right directio... Nov 18, 2010 - 1:30 PM Culpable04 for rears use ST205 rear brake systen, it uses the... Nov 18, 2010 - 3:03 PM eazy2001x yes.. thats me on the Mr2oc.. Eazy2001x :-) and i ... Nov 18, 2010 - 3:16 PM presure2 you guys obviously dont know easy...he is well kno... Nov 18, 2010 - 3:23 PM eazy2001x presure2 Thanks man.. and i think ill do what i sa... Nov 18, 2010 - 3:36 PM eazy2001x sorry another question. do i need the ST205 rotor ... Nov 18, 2010 - 3:56 PM Culpable04 QUOTE (eazy2001x @ Nov 18, 2010 - 3... Nov 18, 2010 - 4:10 PM eazy2001x QUOTE (Culpable04 @ Nov 18, 2010 - 4... Nov 19, 2010 - 8:50 AM eazy2001x are these good for the rear?
http://www.rhdjapan.... Nov 19, 2010 - 10:34 AM Culpable04 the picture shows front disc, but yes C-one rear s... Nov 19, 2010 - 11:00 AM eazy2001x QUOTE (Culpable04 @ Nov 19, 2010 - 11... Nov 19, 2010 - 11:19 AM Culpable04 these are not my pictures, these are taken from Lu... Nov 19, 2010 - 11:41 AM eazy2001x Thank you.. you guys are the best and all the post... Nov 19, 2010 - 11:47 AM mkernz22 are you looking to spend a lot?
there is some goo... Nov 19, 2010 - 12:01 PM eazy2001x shipping is still going to kill me on thos.. its 1... Nov 19, 2010 - 12:15 PM Smaay well being an avid drag racer. the racetrack MUST ... Nov 23, 2010 - 9:44 AM eazy2001x i know and have read about the role cage/Para shoo... Nov 23, 2010 - 11:39 AM eazy2001x Ok, I have been working with a company that offers... Dec 7, 2010 - 12:47 PM Culpable04 both kits will do the job for you, so I think is a... Dec 7, 2010 - 1:57 PM eazy2001x i was thinking the same thing.. I might just go wi... Dec 7, 2010 - 2:01 PM eazy2001x so i got some options.. standard one piece rotors ... Dec 8, 2010 - 3:25 PM playr158 i wouldn't touch anything that was drilled and... Dec 8, 2010 - 8:50 PM eazy2001x ill just go with slotted and what is the big diff ... Dec 9, 2010 - 12:32 AM eazy2001x oh and i got the answer for 1 vs 2 here: http://ww... Dec 9, 2010 - 12:49 AM playr158 yes advantages are weight and they run cooler, muc... Dec 9, 2010 - 12:55 AM eazy2001x wow.. ok.. for the 4 piston fron/rear/slotted/drum... Dec 10, 2010 - 1:57 PM 95CelicaST Wait, so now this is a 800whp daily driver/drag/tr... Dec 10, 2010 - 2:59 PM Culpable04 those 500 bucks can lighten up another section of ... Dec 10, 2010 - 2:59 PM eazy2001x QUOTE (95CelicaST @ Dec 10, 2010 - 2... Dec 10, 2010 - 3:20 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: July 27th, 2025 - 2:33 PM |