Gutted 6G hatch that could trap 150mph in the 1/4 which brake kit? Options

[eazy2001x]

as the title states...

I’m looking form something good enough for drag that would be able to stop a 800whp 94-99 body. I am looking into the Ksport front and rears and would like to use 16-17inch rims, however i need to know if there will be enough stopping power and has anyone incorporated a way to get the e-brake to work.

my options for 16 inch rims are the 11 or 12 inch kit. if i wanted to go to 15 inch rims i would have to use the 11 inch kit. But I dont know what the stock sized rotors are and if i can get away with the 11 inch kit and run 16 inch rims and there be enough stopping power i would go for it.

so my questions are:

which of the two kits would be enough to stop my car?
what are the dimensions of the stock rotors?

Thanks,
Eazy

This post has been edited by eazy2001x: Nov 18, 2010 - 2:05 PM

[Culpable04]

for rears use ST205 rear brake systen, it uses the same caliper as the toyota surpa, but with a bracekt designed for the celica, you'll need to fabricate 5 mm spacers for the caliper / knuncle area to make the caliper aligned with the disc, and it will require no modification for the ebrake to work.

as for the front, you are pretty much asking for a ice cubes to ffed a torch, you can't have big brakes and want 15 inch wheels, is one or the other, the smallest you can go as far as wheels is 16 paired with 11.8 inches disc and ST205 front calipers, and that's cutting it close as that's what I was running for a while. to give you an example about how tight fit it is, I had to pay extra when balancing my wheels so the guy would measure where he can put the weights to avoid contact with the caliper.

so go with some 17 inch wheels, there are plentu light weight ones out there, and as for them being white, you can always buy a 9.99 spray can and make purple wheels look white.

are you a member of mr2oc by any chance ?