Changed: Bad Motor mount!, Need torque specs! Options

[blu94gt]

Ok, changed my topic. Popped my hood and took a quick look, it was obvious: Bad motor mount. Sorry for the crappy cell phone pic in the dark, but can you see how the engine is leaning toward the passenger side? The timing cover is pretty close to resting on the side of the mount.

What brand and where should I order new mounts? I figure I'll just knock all of them out at the same time.


This post has been edited by blu94gt: Dec 6, 2010 - 2:03 PM

[mkernz22]

You will have to get the axle carrier bracket pressed off, and then the bearing pressed off as well.
Then you will need to get a new bearing and the bracket pressed back on.

I just got the bracket taken off because Kevin (Soulend) needed it.
The shop might have over priced a little, but it was $30 to just remove the bracket. It was rusted on pretty well he said so that might have been why.

Btw, I do have an axle with a perfectly good bearing, but no bracket, if you want it? PM me if interested.