FS: 3 point Strut braces front and rear, Fabbing my own brand of braces get em while they're hot! Options

[Darkchylde]

Hey Guys and Gals

My name is Art, I've been a member of the community for about three years. I am a steamfitter by trade and was thinking of fabbing my own strut tower braces I am certified to weld under nuclear conditions with an X-ray test to determine the efficacy of my welds, both of the stick and MIG processes.

I was wondering if there was any interest out there for me to fab these braces for more than myself. I 'm not entirely sure of the materials yet, the easiest to get a hold of and join would be steel. I realize that is probably heavier than most of you would want, I just thought of this today so I'll be checking out the possibility of aluminum as well. Anyway shoot me a reply here on this post or in a p.m., the cost for the braces I am trying to aim for is about 100-150 for a front brace (3-point) and about 50-75 for a rear (3 point as well). These prices are not completely set as I have not made one yet. I am also entertaining the idea of buying the plans to make the frame insert for awd setups but I am not sure about that one yet. Let me know if your interested and in what and I will get on crunching the numbers and the first prototypes. I will post pictures in the next week or so and list the final product materials, and for those do it your selfers, post an autocad print of the plans for a price as well. So hit me back and let's see if we can't make some good parts for ourselves.

First mock up picture, Made this to check fitment for the steel jig I made from the wooden one that I made with Stevenson, from his Jspeed one.
This one is 3/4 schedule 40 steel pipe It's fit into my trunk right now, to make sure the fitment is correct. I have a couple of tweaks to make. But the rears are going into production tomorrow 12/16/10.

Front brace mock up for jig, fitment is good just have a couple of clearances to check

had to make the front support just about from scratch,didn't turn out too bad if you ask me though.


This post has been edited by Darkchylde: Dec 18, 2010 - 1:22 AM

[Darkchylde]

Well guys here is the deal on the harness bars. If you need them I will need certain information from you. There are more peices to be made than just the one bar, you need one for the shoulder straps, one for the crotch belt and one for each of the hip belts. Sooo.... the cost has yet to be determined I will try to be very fair and I'll have some kind of draft and price within the week.

Back to a previous question I need to know if you all want any of theses braces to be of the adjustable type, so that I can have a better idea of the specific hardware needed for the build.



Adjustable: http://www.japperformanceparts.co.uk/pdeta...sp?ID=100866748


Solid: http://image.importtuner.com/f/10242775+w7...strut_tower.jpg

The adjustable option will only be entertained for the front brace only, and that is only if I get enough responses for it. All rear braces will be solid. Personally I prefer the solid look anyway.


Oh and do any of you have an interest in a camera mount on said harness bar?

This post has been edited by Darkchylde: Dec 9, 2010 - 4:22 AM