Celica Flange / bearing ( not hub? ), What type off Flange/hub fit's what car? Options

[Black-ST202]

Hi guys/girls.
I have this problem that i know many many other have as well, When the bearing starts to gett worn out the weel Flange/hub also gett damages. I have looked around for a new Flange/hub/Bearing. But its not easy. So if anyone have experiance whit this can you pleas post what weel Flange/hub that fits what car?

I have found this on ebay. But they only fit a later model and the new model 2000+ im wondering if anyone know if this Flange ( se link ) also fits the Celica 6gen series? ( AT200 ) (ST202 ) (ST205 ) ?

( From 1991 and down) http://cgi.ebay.com/ebaymotors/Matrix-Celi...sQ5fAccessories

( From 2000 and up ) http://cgi.ebay.com/ebaymotors/Toyota-Camr...sQ5fAccessories


Is ther any different size from the FWD to the AWD Flange size? where the axel enter's?

I also know that there is 2 different sizes on the Front Bearing for the Celica GT4. Can come back later whit the outer dim on the bearing later.


I know its a lot of question. But any info helps

Thanks


EDIT!! Sorry guess i used the wrong word ( hub? ) FLANGE is what im looking for?

This post has been edited by Black-ST202: Jan 7, 2011 - 4:57 AM

[808celica]

you'll have to match the splines on the inners to see if the axles will go in. then the diameter that mates with the bearing. then the outer diameter of the bearing to our steering knuckle.


Since people use out parts of a MR2 half-shaft you could prolly transform your car into a 5x114.3 bolt pattern by redrilling your rotors.
(something Im looking into when i get my hands on a friends sw20 parts)