 clutch, not working properly |
 Jan 16, 2004 - 11:21 AM
|
 
|
 Enthusiast  Joined Apr 10, '03 From South Central Los Angeles Currently Offline Reputation: 0 (0%)  |
My clutch is not working correctly. Before i start the car, all gears go in fine with no problem. When i turn the car on and hold the clutch, the gears wont go in. The only way to put it in gear is to have the car turned off, put it in gear, and then turn the car on.
I'm not sure exactly how to explain it but when your clutch is good and you're in first gear, after releasing your clutch about half way, the car starts to move. Well, now, when i'm releasing the clutch, the car starts to move by taking it out just a little bit. It kinda seems like the clutch get's stuck or something. I need some help. This is the only thing holding me back from using my car. any sugestions? |
 |
Replies
|
Jan 19, 2004 - 12:57 PM
|
|
|
Enthusiast Joined Apr 10, '03 From South Central Los Angeles Currently Offline Reputation: 0 (0%) |
The slave cylinder is new. We took apart the tranny on Saturday thinking that it might be that we put the disk on backwards. But everything was fine. The fork is fine too.
The only thing left, in my mind, is that the Master Cylinderis going bad and might not have enough presure. |
Posts in this topic
sphinx clutch Jan 16, 2004 - 11:21 AM
sphinx any thoughts, anyone? Jan 16, 2004 - 1:31 PM SpedToe169 The clutch isn't disengaging properly. Its ei... Jan 16, 2004 - 2:38 PM stelica85 i had a similar problem and speed toe is right i j... Jan 16, 2004 - 7:53 PM SpedToe169 Yup, just make sure you bleed the slave after you ... Jan 17, 2004 - 6:35 PM
 |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: January 15th, 2026 - 4:56 PM |