 Power Locks..., OK |
 Jan 20, 2004 - 4:28 PM
|
 
|
 Enthusiast  Joined Oct 1, '02 From Minnesota, USA Currently Offline Reputation: 0 (0%)  |
Alright, well I just installed my AviStart 4200, it has all the neat stuff like remote start, keyless entry, alarm, etc. I got everything installed, and at the end hooked up those last two wires to the power locks. I hooked them up right and everything...cuz if I would've crossed them then it woulda just unlocked them when I pressed lock...but it dpoesnt do crap. Like I hear the thing switching in my alarm's brain when I press either lock or unlock and those buttons are used to disarm/arm the alarm and that feature works. Does anyone have any idea why this isn't working? I hooked the wires in right by the connector that goes into that panel underneath the driver's side kick panel...I know it's that harness cuz when I unhooked it, the locks didnt work. Help!
-------------------- 95 Toyota Celica GT
Dead for now --> Soon to have a 3S-GTE 02 WRX --> This is for speed - Borla Exhaust - TurboXS BOV - Custom CAI 02 Civic EX - MB Quart Reference 5.25" Components - Rockford MTX 8" Subs in the doors - Alpine Type S Rear Fills - 2x Alpine SWR-1042D Subs in a custom fiberglass box - Alpine F345 Amp for the front doors - Alpine M605 on each Type R - Phoenix Gold wiring - Alpine CDA-9855 Head Unit - Alpine Amp link - 2x Rockford Fosgate 1 Farad Caps - The best Viper 791 alarm install ever |
Posts in this topic
Coomer Did you use any relays for the locking wires, or d... Jan 20, 2004 - 7:11 PM snadman No, because it says in the manual that the two wir... Jan 20, 2004 - 7:18 PM pxcr440 yah you need the relays , Jan 23, 2004 - 2:37 AM Anub1s The way I did mine was I took the two wires that w... Jan 23, 2004 - 10:06 AM
Cormudgen my 2 cents.
i dint need any relays. i came right ... Jan 23, 2004 - 11:57 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: September 20th, 2025 - 2:56 AM |