Jan 25, 2011 - 11:26 AM
|
|
|
Enthusiast ![]() ![]() ![]() Joined Dec 11, '07 From Davie, Florida Currently Offline Reputation: 4 (100%) |
Hey guys,
I was re-routing my battery to my trunk yesterday and after everything was complete, everything started up fine and was getting power to everything. I have a 150 amp ANL fuses on each side of the re-routing power wire. So if there's a short on either side, I should be protected. THE PROBLEM: is after I got everything installed, I realized that none of my interior lights was working. The lights on the a/c panel & the gauges are working. Just the door lights, trunk interior light, and main dome light is out & not coming on at all. I checked fuses and all are fine, what else could be causing the lights to cut out? Any help would be appreciated. EDIT: I believe now that my problem maybe an ignition problem. My headlights won't turn on, unless I turn my key all the way to the "on" position. Plus, now I am getting a "hard start." Like my battery is about to die, but I just put in a new one when I relocated my battery position. I'm thinking, maybe it's a relay or something like that? Please, I need your help! -Thanks, Ryan This post has been edited by str8thugginit4ya: Feb 7, 2011 - 1:48 PM |
![]() |
Feb 1, 2011 - 11:06 AM
|
|
|
Enthusiast ![]() ![]() Joined Oct 25, '07 From Eagan, MN Currently Offline Reputation: 3 (100%) |
We just talked a little about this so I thought I'd write out the steps I would take:
- Batt. Health and Charge - Fusible Link and Fuse check (use an ohmeter if you can get your hands on one!) - Check your relays for proper continuity - Check your connections you made to your battery relocation (grounds, to alternator, etc) - If you have messed or played with any other electrical connections on the car, go back and check to see if they are good Work your way back through the process you took relocationg your battery and make yourself a checklist so you don't overlook any steps. You'll find the problem eventually, just go through the circuit from top to bottom. I pulled up a power source chart for you, so you can see visually how the power flows. Good luck! ![]()
-------------------- -Tyler
|
str8thugginit4ya Ignition Problem??? Jan 25, 2011 - 11:26 AM
95CelicaST Did you actually test the fuses? Or just a visual ... Jan 25, 2011 - 11:36 AM
str8thugginit4ya Just visually. I was thinking it was a fuse proble... Jan 25, 2011 - 11:44 AM
mkernz22 You check them by pulling them out and seeing if t... Jan 25, 2011 - 12:44 PM
str8thugginit4ya QUOTE (mkernz22 @ Jan 25, 2011 - 1:4... Jan 25, 2011 - 5:00 PM
95CelicaST Yeah I've had some that look fine, but are act... Jan 25, 2011 - 1:24 PM
mkernz22 Well hey, you just never know sometimes
If the ta... Jan 25, 2011 - 5:30 PM
str8thugginit4ya Ok, so I went & replaced a bunch of fuses, but... Jan 26, 2011 - 8:06 AM
mkernz22 The dome light has it's own fuse because I bel... Jan 26, 2011 - 8:44 AM
str8thugginit4ya QUOTE (mkernz22 @ Jan 26, 2011 - 8:4... Jan 27, 2011 - 8:22 AM
mkernz22 When you open your doors does it make a bing, bing... Jan 27, 2011 - 10:51 AM
str8thugginit4ya Nope, the ignition is not working properly. It sta... Jan 27, 2011 - 11:36 AM
mkernz22 someone probably unplugged the wire that makes it ... Jan 27, 2011 - 2:00 PM
str8thugginit4ya QUOTE (mkernz22 @ Jan 27, 2011 - 3:0... Jan 27, 2011 - 4:59 PM
str8thugginit4ya Could it be an ignition relay or something like t... Jan 28, 2011 - 9:07 AM
str8thugginit4ya Bump! Please help, I am out of ideas.
-Thank... Feb 1, 2011 - 8:46 AM
Neon90424 I had the bing bing bing thing removed it was driv... Feb 1, 2011 - 12:07 PM
trdproven theres also a fuse that is labeled "X" y... Feb 1, 2011 - 8:01 PM
str8thugginit4ya QUOTE (trdproven @ Feb 1, 2011 - 9:0... Feb 3, 2011 - 12:30 PM
PluraticRaver From where your battary was, How did you hook up t... Feb 4, 2011 - 9:26 AM
str8thugginit4ya Fixed the problem! It wasn't a fuse proble... Feb 7, 2011 - 1:47 PM![]() ![]() |
| Lo-Fi Version | Time is now: December 7th, 2025 - 12:23 PM |