![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Dec 26, '09 From Albuquerque, NM Currently Offline Reputation: 19 (100%) ![]() |
I'm thinking of getting 15mm spacers up front and 25mm spacers in the rear. Will I need an alignment?
Also, I know the hub diameter is 54.1 mm, but what's the center bore? Is it the same? This post has been edited by HectortheRican: Feb 5, 2011 - 12:11 AM -------------------- taking too long to mod since '09
June '12 COTM '95 AT200 |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Feb 24, '07 From Oahu, Hawaii Currently Offline Reputation: 23 (100%) ![]() |
like i said, for those who dont know. post the specs/pics of the alignment sheet they were supposed to give you. I wanna see how good they did.
-------------------- I don't normally drive fast, but when I do its on a curvy section of this island
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Dec 26, '09 From Albuquerque, NM Currently Offline Reputation: 19 (100%) ![]() |
like i said, for those who dont know. post the specs/pics of the alignment sheet they were supposed to give you. I wanna see how good they did. Alright, I gotta find them first... They're with the receipt. Edit: Alright Jon, don't expect anything amazing. They thought I needed camber bolts at first but they read the data wrong. I told them I didn't need any but the wouldn't listen. Then when I picked it up, they were like, "Yeah, well.. we didn't use the bolts like we thought." Idiots ![]() This post has been edited by HectortheRican: Feb 5, 2011 - 6:56 PM -------------------- taking too long to mod since '09
June '12 COTM '95 AT200 |
![]() ![]() |
Lo-Fi Version | Time is now: September 18th, 2025 - 10:05 PM |