Lowering just the front end?, any danger? Options

[Goonter]

Ok strange question as it might be. Is there any significant dangers to just lowering just the front of my car? Faster wear on other parts because only the front is lowered? I dont wanna lower the back cause i want a little bit of "nose down" look for the 6gc. Thanks in advance for the inputs.

[azian_advanced]

there's nothing wrong with having the front lower than the rear. i've had front tein lowering springs and stock rears for about a year without issues. and yeah the front gap is pretty hideous, that's why i did the fronts only at first but then realized lowering springs all around in the winter ain't so bad after all. just as long as you're not on coilovers because then you would have to deal with reduced comfort, interior vibrations, and if you go really low then you're also gonna get torn cv boots.

here's my car a few years ago with the front lowered on tein s-techs




This post has been edited by azian_advanced: Feb 11, 2011 - 10:21 PM

[Goonter]

there's nothing wrong with having the front lower than the rear. i've had front tein lowering springs and stock rears for about a year without issues. and yeah the front gap is pretty hideous, that's why i did the fronts only at first but then realized lowering springs all around in the winter ain't so bad after all. just as long as you're not on coilovers because then you would have to deal with reduced comfort, interior vibrations, and if you go really low then you're also gonna get torn cv boots.

here's my car a few years ago with the front lowered on tein s-techs

Exactly what i was looking for. Thanks AZ. BTW i hope you dont mind i got a Aeromagic lip from JP also >.> I had to cut the lip in half or i woulda payed 310 dollars just shipping alone. Denley told me you got the lip also. How did you get yours shipped here?