Feb 13, 2011 - 5:19 PM
|
|
|
Enthusiast ![]() Joined Jan 10, '11 From Trail BC Currently Offline Reputation: 1 (100%) |
Here is a question that's driving me crazy with my build, and in general....
On the gt-4, is it ok 2 vent the BOV completly 2 atmosphere?? I ask this because I have noticed a lot of pics of st205s with a small hose that goes from the BOV into the airbox inlet, or aftermarket pipe that is designed for recirculation. Unfortunately when I received my swap, I did not get the airbox piece 2 connect my blitz dd 2....so I mounted it right off the IC outlet with a vacuum line on other end, as for my intake there are no hoses attached 2 it, just a big K&N filter on the end with a sensor after that in the intake tube. Is this ok 2 do, or should there be some recirculation from the BOV back into the intake??? And also the little black box that sits right behind the IC, that also shows a hose being plumbed into the intake, I just put a breather on that, is that a problem??? |
![]() |
Feb 13, 2011 - 10:17 PM
|
|
|
Enthusiast ![]() ![]() Joined Nov 16, '06 From Findlay,Oh Currently Offline Reputation: -1 (33%) |
check out turboxs hybrid BOV's they recirculate first and also have two ports on the back side of BOV to also vent to "air" so you get both of best worlds....
|
injection Blow-off air???? Feb 13, 2011 - 5:19 PM
Johnnyny recirculate if u vent u run rich Feb 13, 2011 - 8:54 PM
Neon90424 205's use a manifold pressure sensor venting i... Feb 13, 2011 - 9:33 PM
bsamps4 Josh, If you're concerned you could use a forg... Feb 13, 2011 - 10:23 PM
injection QUOTE (bsamps4 @ Feb 13, 2011 - 11:2... Feb 13, 2011 - 10:44 PM
95celicastLSR QUOTE (injection @ Feb 13, 2011 - 11... Feb 16, 2011 - 3:38 PM
schmooot There are two different IAT's. Assuming a 3rd... Feb 16, 2011 - 9:56 PM![]() ![]() |
| Lo-Fi Version | Time is now: February 25th, 2026 - 6:46 PM |