Feb 12, 2011 - 6:25 PM
|
|
|
Enthusiast ![]() Joined Jun 10, '10 From Fredericton, New Brunswick, Canada Currently Offline Reputation: 0 (0%) |
Hey guys, I've been looking into different options for engine management on my gt4 and was wondering what everyone else that had an after market set up was running on their 3rd gen 3sgte, and what their opinion of it is so far.
Been looking into a few different options.. including the apexi PowerFC, as well as a one shot deal like what Mine's offers. Anyone here have any personal experience with either of these? or any other suggestions that they have personally had good luck with? I'm liking the idea of the Mine's set up as there is no AWD dyno anywhere near me so tuning a full stand alone ems will be a bit of a pain in the ass on the street, unless I can find a good base map somewhere for it.. |
![]() |
Feb 15, 2011 - 10:19 PM
|
|
|
Enthusiast ![]() ![]() ![]() Joined Feb 15, '05 From Frederick, Maryland Currently Offline Reputation: 8 (75%) |
I would just say that I believe Haltech EMS' are the way to go and so far I have seen crazy gains on local toyota tuners but then again you have to find someone that'll wire it and tune it if you're not as fortunate as me. Out of my old setup I got 300whp at 12 psi maybe peaking at 13 psi. Ive seen tem tune 2jz motors past the 1000 mark and I trust those ems'. just my 2 cents.....
|
Geddes After market engine management Feb 12, 2011 - 6:25 PM
chacha mines is usually for the mr2 set up and if you wan... Feb 12, 2011 - 6:30 PM
Geddes QUOTE (chacha @ Feb 12, 2011 - 7:30 ... Feb 12, 2011 - 7:15 PM
chacha see if you can find a c-one ecu....they come tune ... Feb 13, 2011 - 4:20 AM
Rusty ST205 3S-GTE LINK ECU (plug and play)
QUOTE Free y... Feb 14, 2011 - 12:02 AM
Smaay stick with the Power FC, its a 100% plug and play ... Feb 14, 2011 - 11:11 AM
Smaay Haltechs are also crazy expensive Feb 16, 2011 - 12:12 AM
Geddes QUOTE (Smaay @ Feb 16, 2011 - 12:12 ... Feb 16, 2011 - 5:05 PM
Mike_V The Haltech Platinum Sport 1000 is available in a ... Feb 17, 2011 - 10:05 AM
CELL_PROTOTYPE_X AEM is probably what I'll be running, but main... Feb 19, 2011 - 5:14 PM
Smaay i just finished rebuilding my patch harness so i c... Feb 19, 2011 - 9:35 PM
Smaay oh the AEM is not set up for the 3rd gen 3S-GTE, t... Feb 21, 2011 - 1:51 PM![]() ![]() |
| Lo-Fi Version | Time is now: January 13th, 2026 - 3:41 PM |