3" b-midpipes...are there any aftermarket ones available?, custom or pre-made? Options

[chacha]

any one who went swap...did you just custom make your or did you find an after market one?...

if you made one....what type of steel did you use and how much did the shop charge you to weld if you went a shop?

compatibility of the 3" b-midpipe for the st205 work for the st20X?

if aftermarket, which one did you go for?

i found one made by OBX....but not sure of the actual size and quality; anyone have had experience with their midpipe?



OBX midpipe and manifold combo 2.2L

This post has been edited by chacha: Feb 17, 2011 - 11:35 AM

[chacha]

pm me a price....just looking for the midpipe really with the qtp outlet like batman.

3in from the dp to the cat.

4-500 is what i paid for the greddy sp2 cat-back...let me know if u can do a 3in piping from dp to exhaust SS all the way.

This post has been edited by chacha: Feb 18, 2011 - 12:19 PM

[presure2]

pm me a price....just looking for the midpipe really with the qtp outlet like batman.

3in from the dp to the cat.

4-500 is what i paid for the greddy sp2 cat-back...let me know if u can do a 3in piping from dp to exhaust SS all the way.

i cant do it without the car here.
i could leave the pipe long, and you could have a local shop terminate it and throw a flange on, but that would kind of defeat the purpose of having me make it, especially if i weld it all up in stainless.
the piping for a complete exhaust, under axle in 304 stainless would be ~200-250 or so, plus your muffler, flex pipe, flanges, hardware..depending on what you spend on a muffler, your looking ~ 500 or so, just in materials.
cameron (ted95) is supossed to be having him make him a b-pipe, with a cutout as well, he lives local to me.
when i do his, i could do 2, but i cannot garantee it will bolt to your exsisting exhaust, since i dont know exactly where your current exhaust starts, or what kind of flanges it uses.
PM sent.