![]() |
![]() |
![]() |
|
Enthusiast Joined Feb 16, '11 From London Currently Offline Reputation: 0 (0%) ![]() |
Alright guys...
![]() I'm assuming this is a gen7 (seeing as the picture is stolen from 'new celica.org') I'm wondering if these are exactly the same on the gen 6? Does it have front and rear central jacking points? The reason I'm asking this is I'm getting a strange rubbing and creaking sound from the passenger side which is easily audible when setting off from a stand still and if changing into second at low revs, looks like the pads are actually touching the disc?? Here's a photo taken while the wheel is still on: ![]() Circled in red...the brake disc and pad are actually touching, there's still ability to spin the wheel freely (I jacked it up real quick yesterday to see what sound came back when spinning the wheel) but it does make a rubbing sound, area circled in blue...is that scoring or just signs of a used disc?. Still need confirmation on where I can jack/axle stand the car properly though! If anyone has any photo's I'd be dead grateful |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Apr 17, '10 From U.P. michigan GO STATE Currently Offline Reputation: 3 (100%) ![]() |
take the calipers off and buy some siliglide, lube the metal brakets that hold the pads in place and lube the back side of the pads, it will most likley get rid of the noise. as for the screeching, discribe screeching.. does it sound more brakes related or a creeking noise when you use the brakes. if its screeching i would say replace the rotors and pads.
This post has been edited by 4-eyed-freek: Feb 27, 2011 - 1:57 AM -------------------- It takes 8,460 bolts to assemble an automobile, and one nut to scatter it all over the road.
![]() Celica: The name is derived from the Spanish word for "heavenly" or "celestial". Back-2-Back July COTM 15&16 |
![]() ![]() |
Lo-Fi Version | Time is now: July 28th, 2025 - 9:08 AM |