 tein s tech question |
 Mar 2, 2011 - 4:34 PM
|
 
|
|
Enthusiast  Joined Aug 17, '10 Currently Offline Reputation: 0 (0%)  |
Hi i have installed the tein s tech springs and it seems that the front left side of the car is about 7-8mm higher than right one but everything has installed fine the spring sits where it should be. Also I see members with tein springs sit lower than mine, I have about 18mm gap at front-right between tire and fender and about 25mm at the front left with tires 215/45/17. Is that normal?
A friend of mine gave me the springs with about new struts that have for some years in his garage. |
 |
Replies
|
Mar 4, 2011 - 2:18 PM
|
|
|
Enthusiast Joined Aug 17, '10 Currently Offline Reputation: 0 (0%) |
Mounts are also new and i double checked it but everything is installed OK.
I checked the springs and there are sit were they should. Is it possible that this is happening due to a weight difference by the engine because the engine is not in the center of the engine bay but at right and at the other side is just the gearbox and my car also is right hand drive but i don't know if this is something that is possible to affect. But there is not very noticeable but that little difference is bother me. |
Posts in this topic
marinos tein s tech question Mar 2, 2011 - 4:34 PM
95CelicaST Did you replace the shocks at the same time? Diffe... Mar 2, 2011 - 4:36 PM
marinos QUOTE (95CelicaST @ Mar 2, 2011 - 4... Mar 3, 2011 - 2:16 PM jordisonjr Did it sit un-even like this on his car?
If not I... Mar 4, 2011 - 1:19 PM jordisonjr you kno what? now that I think of it, my car sits ... Mar 4, 2011 - 4:26 PM marinos So then the driver side must be a bit heavier than... Mar 4, 2011 - 10:15 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: September 19th, 2025 - 8:06 AM |