 motor mount, bolt size |
 Jan 15, 2004 - 12:56 PM
|
 
|
|
Enthusiast Joined Jan 15, '04 From VA Currently Offline Reputation: 0 (0%)  |
I was just wondering if anybody in here knew off hand what size bolt was supposed to go in the motor mounts on the 5SFE. Specifically the front mount where it goes into the block. Somehow I managed to lose one while driving and I need to get something put back in there quick.
|
 |
Replies
|
Jan 24, 2004 - 12:54 PM
|
|
 Enthusiast  Joined Nov 12, '02 From Columbus, Ohio Currently Offline Reputation: 15 (100%) |
Those bolts are 14mm. If it was me, I'd take off the tranny. You are gonna have to get that bottom one rethreaded, but there isn't enough room to do it while the tranny is in the car. I know that casting isn't too wide so go with a 15 or 16mm if you can find one. If not use 17mm. This happened to the rear mount on my tranny. The casing broke off,lol, right down the middle of both bolt holes. I made two solid mounts that bolt to the block and the tranny.
|
Posts in this topic
Buggin motor mount Jan 15, 2004 - 12:56 PM
celica3sgte That's a 14mm. Use locktite when put it back ... Jan 15, 2004 - 8:07 PM Buggin well mine are 17mm now... I somehow managed to yan... Jan 20, 2004 - 6:11 PM macavely QUOTE (Buggin @ Jan 20, 2004 - 7:11 PM) well mine ... Jan 20, 2004 - 7:20 PM sphinx QUOTE (macavely @ Jan 20, 2004 - 5:20 PM) QUOTE (B... Jan 20, 2004 - 7:58 PM Buggin wrong answer
front mount on the transmission
two... Jan 24, 2004 - 3:17 AM
Buggin They WERE 14mm. They have already been rethreaded ... Jan 24, 2004 - 8:04 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: January 16th, 2026 - 1:27 PM |