 Figured out my problem. |
 Mar 27, 2011 - 6:27 PM
|
 
|
 Enthusiast  Joined Nov 24, '07 From Tucson, Az Currently Offline Reputation: 2 (100%)  |
Hey everyone,
Ive been hearing this rattle coming from my 3SGTE. it starts about 10 PSI, and I think the Boost isn't going past 10-ish PSI as well. I Have a Blitz adjustable BoV on it just off of the intercooler. now my thought is, the Valve inside, is not able to stay closed at 10-ish PSI and starts to flutter open. is this possible? is it easy to repair if so? Thanks, Kevin This post has been edited by Soulend: Mar 31, 2011 - 1:24 AM |
 |
Replies
|
Mar 28, 2011 - 7:09 AM
|
|
 Enthusiast Joined Aug 31, '02 From Philadelphia, PA Currently Offline Reputation: 8 (100%) |
QUOTE (Smaay @ Mar 27, 2011 - 11:52 PM)  cant be the BOV. they are designed to close under any boost condition. so even at 2 lbs, its going to be closed. Depends if the blitz is a push or a pull type. Some of them just have a spring that pushes against the boost, and if its set too soft, it can in fact leak boost. There should be an soft/hard adjustment on the bov. You can try setting it to a harder setting. -------------------- 15PSI - 30MPG - Megasquirt Tuned
|
Posts in this topic
Soulend Figured out my problem. Mar 27, 2011 - 6:27 PM
Smaay cant be the BOV. they are designed to close under ... Mar 27, 2011 - 10:52 PM Soulend Hrm, I think its a push... because when I rev the ... Mar 28, 2011 - 12:46 PM delusionz Tighten the adjuster on the BOV a little, see how ... Mar 28, 2011 - 1:03 PM Smaay i dont know of any push style BOV, everyone i have... Mar 29, 2011 - 8:34 AM Soulend Thaaats what I meant.. :\ sorry yeah...
Kevi... Mar 29, 2011 - 11:10 AM Soulend I think I might know what was causing the rattle..... Mar 29, 2011 - 11:38 PM Soulend so while working on all the mounts and fixing them... Mar 31, 2011 - 1:30 AM presure2 blue loctite is the shiz if you use it correctly.
... Mar 31, 2011 - 6:26 AM Culpable04 I also use blue loctite and it works GREAT. someth... Mar 31, 2011 - 6:33 AM lagos I think the problem is that you didn't tighten... Mar 31, 2011 - 7:17 AM Soulend I would admit the Turbo to manifold weren't to... Mar 31, 2011 - 10:12 AM
presure2 yea, kev, it happens to all of us.
i've had a... Mar 31, 2011 - 1:00 PM purplegt4 QUOTE (presure2 @ Mar 31, 2011 - 1:0... Mar 31, 2011 - 1:48 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: October 27th, 2025 - 11:44 AM |