ABS light is on, tried pulling the abs code, NEED HELP PLEASE! Options

[barterj]

i fallowed a how to i found telling me to bridge the Tc and E1 ports and do the same thing as reading and engine code except its off the abs light. This is what happens.
When i turn the key the abs is illuminated, it goes out for second and then comes back on and stays on, its doesn't repeat. So i read something that says if the abs light stays on it could be a faulty abs computer. I went to the scrap yard and found 2 more and tried them both and the same thing happened. I can't imagine that both abs computers i tried were both faulty as well as mine. the chances of that i assume would be one in a million. any help would be appreciated.

This post has been edited by barterj: Jul 15, 2010 - 6:14 PM

[opie_7afe]

braking problems i dont really have last week some idiot in a 18 wheeler pulled out infront of me had to put on my brakes but dont recall no abs vibration but i was more worried about me not running into the idiot then feeling for vibration...and no i havent cleared the codes i shall do that though slipped my mind been sick here lately so mind is kinda wacky lol....and where are the rear abs connections at besides at the rear drum? or do they run all the way up front... the fronts i know where there at... thing thats confusing me is the open circuits which does lead me to believe corossion or some wires cut or something.....