![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Dec 26, '09 From Albuquerque, NM Currently Offline Reputation: 19 (100%) ![]() |
I got my GT-Four rear bar today and, I couldn't get it settled on the strut bolts. I tried jacking up either side to see if that would work, but nothing. The bar would line up with the 4 bolts and sit on them, but I couldn't push it down. Any tips?
-------------------- taking too long to mod since '09
June '12 COTM '95 AT200 |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Feb 24, '07 From Oahu, Hawaii Currently Offline Reputation: 23 (100%) ![]() |
wait what??? you have to jack the car up to fit the rear bar? i was sitting on my sub box with the car on the ground when i installed, everything fit cherry too.
-------------------- I don't normally drive fast, but when I do its on a curvy section of this island
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Dec 26, '09 From Albuquerque, NM Currently Offline Reputation: 19 (100%) ![]() |
wait what??? you have to jack the car up to fit the rear bar? i was sitting on my sub box with the car on the ground when i installed, everything fit cherry too. I dunno? I was weird. I was trying to fit it and all 4 bolts were lining up with the holes, but the bar still needed to go down about 2/5" to sit on the tower and I couldn't push it down. I didn't jack the whole car up, I just had to lift it maybe 2 or 3 inches. -------------------- taking too long to mod since '09
June '12 COTM '95 AT200 |
![]() ![]() |
Lo-Fi Version | Time is now: June 2nd, 2025 - 9:23 PM |