FS: E153 FWD conversion parts Options

[Vip09]

All parts are from an ST185 Alltrac. $75 shipped.

[Vip09]

Here is what I found with a quick search.

converting to FWD is easy.

on the tranny, there are 4 bolts that hold a cover on where the selector would normally go in a FWD situation, you remove that cover, the 2 plugs on the top of the tranny (one is a fill bolt, the other is a breather vent), remove the 2nd shift lever that attaches to the tranny with 2 bolts. then pull the mr2 gear selector arm out of the tranny. (make sure the tranny is in neutral when you do it.)
then, the FWD selector goes in where the cover plate was, the 2 top plugs go in, and you will have to drill 2 holes for the other shifter arm (the spots are there for them, you just have to drill and tap them)

for the speedo sensor, you just need a electronic speedo sensor from a 93+e153. no big whoop. jdm, usdm, it shouldnt matter, all it does is send a pulse to the ecu.

as far as mounts, and cables, you NEED the 205 rear mount, and shifter cables, dont let anyone else tell you otherwise.
it wont shift properlly without them.