 too much negative camber |
 Apr 17, 2011 - 2:35 PM
|
 
|
 Enthusiast  Joined Aug 11, '08 From London Currently Offline Reputation: 7 (100%)  |
My rear arms are solid and I can't adjust them. I have too much negative camber. Camber bolts gives too little effect as I need to loose about 2 degs. Any thoughts on how to correct this?
|
 |
Replies
|
Apr 19, 2011 - 4:25 PM
|
|
|
Enthusiast Joined Aug 11, '08 From London Currently Offline Reputation: 7 (100%) |
QUOTE (delusionz @ Apr 19, 2011 - 9:05 AM)  you have ET13 wheels? lol they must stick out out the guards alot you rolled the bottom lip? Nope. Fits perfectly flushed in the front and I'm going to put 20mm in the rears to make them match. QUOTE (95CelicaST @ Apr 19, 2011 - 9:24 AM) If you're only getting 1 degree from camber bolts then you're doing it wrong. How so? I didn't think it's physically imposable to adjust them in any other way. QUOTE (azian_advanced @ Apr 19, 2011 - 11:04 AM) I just had an idea. can't you replace the rear solid lateral arm with another front lateral adjustable arm? that way you all the lateral arms are adjustable? and just shorten the arms to give more positive camber change. QUOTE (playr158 @ Apr 19, 2011 - 2:20 PM) You could always modify the stock arms to make them adjustable. They are hollow units, measure up from the outter mount about 2 or 3" and slice out about an inch. Tap the inside of the arm and thread in a stud. Tap the other side and adjust. I don't believe it would weaken the unit. Yes which is why I think the only way forward is to make my own. Maybe I'll source a set of stock ones and send it off or maybe buy a set of BMW control arms and modify them. The question is how much shorter should I go? |
Posts in this topic
yellowchinaman too much negative camber Apr 17, 2011 - 2:35 PM
4-eyed-freek your rear arms are solid? hmm the only thing i can... Apr 17, 2011 - 2:46 PM delusionz Do you use BC coilovers?
I have the same thing, w... Apr 17, 2011 - 11:16 PM
yellowchinaman QUOTE (delusionz @ Apr 18, 2011 - 12... Apr 18, 2011 - 3:01 PM Culpable04 raise the car back up just enough to get an adjust... Apr 18, 2011 - 3:06 PM delusionz I'm running 225/50ZR16 tyres, If I was running... Apr 18, 2011 - 4:57 PM yellowchinaman QUOTE (Culpable04 @ Apr 18, 2011 - 4... Apr 19, 2011 - 2:11 AM delusionz yeah shorter swingarms.
So you do have the cambe... Apr 19, 2011 - 3:03 AM yellowchinaman QUOTE (delusionz @ Apr 19, 2011 - 4... Apr 19, 2011 - 7:33 AM delusionz you have ET13 wheels? lol they must stick out out ... Apr 19, 2011 - 8:05 AM 95CelicaST If you're only getting 1 degree from camber bo... Apr 19, 2011 - 8:24 AM azian_advanced I just had an idea. can't you replace the rear... Apr 19, 2011 - 10:04 AM playr158 You could always modify the stock arms to make the... Apr 19, 2011 - 1:20 PM delusionz Where do the camber bolts go anyways? Do they repl... Apr 19, 2011 - 6:05 PM 95CelicaST Here. Apr 20, 2011 - 12:34 PM playr158 QUOTE (yellowchinaman @ Apr 19, 2011 - 5... Apr 20, 2011 - 2:16 PM yellowchinaman I had a brain storm
If a camber bolt gives +/- 1.... Apr 25, 2011 - 5:33 AM delusionz im thinking, weld up the mounting holes and redril... Jul 29, 2011 - 8:06 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: October 25th, 2025 - 2:55 AM |