JDM tail lights installation, Not the same bulbs and wires Options

[dudeofchaos]

I just got my jdm tail lights from the mail.

I'm getting them on at the moment but I thought they had the same bulbs and wires. There are 5 bulbs on usdm tails and 4 on the jdm ones. So I guess I have to change the wiring of my usdm and use the Jdm wires? But there's a small bushing that the wires go thought that's hard to get out so I was wondering if there's another alternative?

Thanks

[TheChildOfTheSea]

You won't have to change your wiring/harness. you should have 4 plugs of the same size and 1 smaller.
Look carefully at your harness, follow your wiring...1 can't fit in a hole that wasn't designed for, the screws are different: 3 or 4 pins with smaller or bigger sides...and if you have 1 extra, doesn't have to be connected, just leave it...But if you miss one ( my guess would be the small one) you need to change your harness, but the small one is only for the USDM light.

A little detail, you know that in Quebec, the law requires you to have a RED deflector on every tail lights...
SO if you're trying to install these: http://www.sunrisejdmmotors.com/images/par...tHqR1tyZ8wY.jpg or those: http://admin.rpmgarage.com/resize.php?pic=...pg&size=280
You're not in law...500$ fine if you get caught with them...