![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() Joined May 17, '03 From Ontario, Canada Currently Offline Reputation: 1 (100%) ![]() |
Okay, so I go to drive last night... no low beams, everything else works.
today I am changing bulbs and fuses... nothing get out the test light, no power is getting to the fuse. Pull the relay, It's getting the signal and has power, so I think that is it. phoned the parts store and they said dealer only part. Oh well, I guess I'll find out on monday. anyone else run across this? |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() Joined May 17, '03 From Ontario, Canada Currently Offline Reputation: 1 (100%) ![]() |
no alarm
the high beams work as normal, just the low's don't work there are only 1 fuse for each of the left and right sides, and i have checked both of them as well as the bulbs. I can not find a wiring diagram for a 6gc, but I found one for a 94 mr2 and the switch is on the ground side and if it is wired the same as that car, then it has to be the switch that is gone - which means steering column ![]() |
![]() ![]() |
Lo-Fi Version | Time is now: September 10th, 2025 - 4:25 PM |