 Plasma Dial Installation |
 May 7, 2011 - 2:25 PM
|
 
|
|
Enthusiast Joined May 7, '11 From Stockport Currently Offline Reputation: 0 (0%)  |
I recently purchased some indigo dials, and have them all in place in the instrument cluster. The needles move, and everything is good. Except for one thing; which wire do I connect my red power wire to? There are 3 wiring harnesses that fit in to the back of the instrument cluster, one with 10 wires, one with 12 wires, and one with 16 wires. I've got the metal firewall right behind the instrument cluster, so that'll ground, but which wire is the instrument cluster lights? There's so many to pick from and I really think I might cry.
Please help! Thanks, Andy. |
 |
Replies
|
May 7, 2011 - 4:59 PM
|
|
 Enthusiast  Joined Apr 17, '10 From U.P. michigan GO STATE Currently Offline Reputation: 3 (100%) |
splice into the cigarette lighter. you will have to take the center councle out and what not to get at it but its beter than trying to go into the actual guage harness
-------------------- It takes 8,460 bolts to assemble an automobile, and one nut to scatter it all over the road.
 Celica: The name is derived from the Spanish word for "heavenly" or "celestial". Back-2-Back July COTM 15&16 |
Posts in this topic
MagnaMorbius Plasma Dial Installation May 7, 2011 - 2:25 PM
MagnaMorbius What are the wiring colours on the cigarette light... May 7, 2011 - 11:51 PM ST205WRC if you want them on only when you turn your lights... May 8, 2011 - 7:53 AM MagnaMorbius That was absolutely spot on - I wired it to the ea... May 8, 2011 - 12:51 PM
ST205WRC QUOTE (MagnaMorbius @ May 8, 2011 - 12... May 9, 2011 - 5:18 AM mkernz22 You could have wired it to a switch too May 8, 2011 - 1:21 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: July 20th, 2025 - 4:13 PM |