6G Celicas Forums

Welcome Guest ( Log In | Register )

> Plasma Dial Installation
post May 7, 2011 - 2:25 PM
+Quote Post
MagnaMorbius

Enthusiast

Joined May 7, '11
From Stockport
Currently Offline

Reputation: 0 (0%)




I recently purchased some indigo dials, and have them all in place in the instrument cluster. The needles move, and everything is good. Except for one thing; which wire do I connect my red power wire to? There are 3 wiring harnesses that fit in to the back of the instrument cluster, one with 10 wires, one with 12 wires, and one with 16 wires. I've got the metal firewall right behind the instrument cluster, so that'll ground, but which wire is the instrument cluster lights? There's so many to pick from and I really think I might cry.

Please help!

Thanks,

Andy.
 
Start new topic
Replies
post May 8, 2011 - 7:53 AM
+Quote Post
ST205WRC

Enthusiast
**
Joined Dec 30, '10
From amarillo texas
Currently Offline

Reputation: 6 (100%)




if you want them on only when you turn your lights on then splice it into the illumination wire on your radio. if you have an after market deck its normally orange (i know it is on kenwood). you will have to check depending on your deck but that should do the trick.

This post has been edited by ST205WRC: May 8, 2011 - 7:54 AM

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: July 24th, 2025 - 7:17 AM